Ton Posted February 16 Share Posted February 16 i have a 1934 ac mack and im looking for where i could get front fenders or look to see if anybody makes them. thanks Quote Link to comment Share on other sites More sharing options...
paulbrook Posted February 22 Share Posted February 22 I can get them made but delivery might be a bit expensive! I even have an AC fender as a pattern, but would need to mock up the inner valance that runs from the inner edge of the fender to the top of the frame rail. Vintage Body, Panel & Wing Fabrication | Boydell & Jacks (featherwing.com) Quote Link to comment Share on other sites More sharing options...
Ton Posted February 22 Author Share Posted February 22 i wish you were closer. lol. thanks for the info. Quote Link to comment Share on other sites More sharing options...
ekennedy21 Posted February 23 Share Posted February 23 Melnick metal works in Ct can make them. You need the later domed fender for a 34. I am not sure if they or anyone else has a buck(pattern) for one of those or if it would need to be built. 1 Quote Link to comment Share on other sites More sharing options...
paulbrook Posted February 23 Share Posted February 23 19 hours ago, Ton said: i wish you were closer. lol. thanks for the info. I wonder how much it would actually be? The last set of fenders they did for me was for a Diamond T 980, and they were big old things, with a back edge and spot welded outer valence. The pair cost £600, which must be about $800. So I wonder what the shipping would be? The AC fenders are much smaller. 1 Quote Link to comment Share on other sites More sharing options...
Ton Posted February 25 Author Share Posted February 25 i will have to try to figure out how to get the cost. thanks Quote Link to comment Share on other sites More sharing options...
Ton Posted February 25 Author Share Posted February 25 i did talk to melnick metal and they said if they had the blueprints they could make them. i tried to get ahold of the mack museum but they are closed. Quote Link to comment Share on other sites More sharing options...
yarnall Posted February 26 Share Posted February 26 3 hours ago, Ton said: i did talk to melnick metal and they said if they had the blueprints they could make them. i tried to get ahold of the mack museum but they are closed. You can submit an information request on line at the. Mack Museum website. That is where they would send you if you called them. They are still processing requests but it takes a while. Quote Link to comment Share on other sites More sharing options...
Ton Posted February 27 Author Share Posted February 27 ok thanks!! Quote Link to comment Share on other sites More sharing options...
paulbrook Posted March 2 Share Posted March 2 I have the drawings (from the museum) and could probably scan them and send them over - trouble is I am moving house and all my files are all boxed up ready for the move. But I should have them out of the boxes by the end of next week. Quote Link to comment Share on other sites More sharing options...
Ton Posted March 7 Author Share Posted March 7 thank you that sounds great. good luck with the move. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.