Jump to content

Ticking sound


Vicki
 Share

Recommended Posts

8 minutes ago, Vicki said:

Was told the push rod was changed. Still ticking. They are pulling the head to see if it's a valve.

Probably not a bad idea. I had a 3406 CAT in an '87 LTL 9000 that had a tick. Found a bent push rod, replaced the rod, set the lash and the tick persisted. I was taking the truck to a mechanic friends place (12 miles away) to have him check it out and on the way it dropped the exhaust valve in the same cylinder that the push rod was bent and put the rod through the block. The tick went away 😜

Edited by Licensed to kill
Link to comment
Share on other sites

On 10/6/2020 at 5:18 PM, Mackpro said:

If ETECH. Could be “H ring” in block that holds and alings the roller lifter . It can be dislodged and can cause roller lifter to cam alignment issues 

Had heads checked and they are good. Mechanic said he ordered a special tool to check the H ring and it's in the right place. 

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...