rustydog Posted November 21, 2008 Share Posted November 21, 2008 DOES ANYONE HAVE SUGGESTIONS FOR REPLACING 4" AIR INTAKE HOSE, (FROM MANIFOLD, TO FIREWALL), HAVING TROUBLE LOCATING ITEM. FOR 59 B61. THX, RUSTY Quote Link to comment Share on other sites More sharing options...
Mike Posted November 21, 2008 Share Posted November 21, 2008 Hey Rusty,Best thing to do is buy the hose, if need be flair the ends. Make sure to put clamps or nuts on first. Use some of that fro ingenuity. Keep us posted.mike Quote Link to comment Share on other sites More sharing options...
rustydog Posted November 22, 2008 Author Share Posted November 22, 2008 Hey Rusty,Best thing to do is buy the hose, if need be flair the ends. Make sure to put clamps or nuts on first. Use some of that fro ingenuity. Keep us posted.mike Mike, I got a price of around $50./per foot for 4" hose; which prompted me to ask here if there's any cheaper way around it. Thanks Quote Link to comment Share on other sites More sharing options...
HK Trucking Posted November 22, 2008 Share Posted November 22, 2008 4" schedule 40 plastic sewer pipe works good too. You just cut it and glue on whatever elbows you need to get it to fit, then connect it at each end with a short rubber boot and hose clamps.Of course it won't look original, but it does get the job done. Quote "If You Can't Shift It Smoothly, You Shouldn't Be Driving It" Link to comment Share on other sites More sharing options...
rustydog Posted November 22, 2008 Author Share Posted November 22, 2008 4" schedule 40 plastic sewer pipe works good too. You just cut it and glue on whatever elbows you need to get it to fit, then connect it at each end with a short rubber boot and hose clamps.Of course it won't look original, but it does get the job done.Thanks Herb, I was hoping somebody would tell me that would do the job!! (for now anyway) Quote Link to comment Share on other sites More sharing options...
CML Service Posted November 23, 2008 Share Posted November 23, 2008 You may need a 90 degree in that hose. So you may want to consider a 90 degree exhaust elbow. Then all you need is short sections of hose and clamps for the connections. The steel pipe will look good and handle the under hood heat for ever. Chuck Quote Link to comment Share on other sites More sharing options...
rustydog Posted November 23, 2008 Author Share Posted November 23, 2008 You may need a 90 degree in that hose. So you may want to consider a 90 degree exhaust elbow. Then all you need is short sections of hose and clamps for the connections. The steel pipe will look good and handle the under hood heat for ever. ChuckThanks, Chuck.......I used PVC and hose connections for now. But the exaust fitting will be the next step, (summertime) unless I find the original replacement. Rusty Quote Link to comment Share on other sites More sharing options...
HeyCharger Posted November 23, 2008 Share Posted November 23, 2008 DOES ANYONE HAVE SUGGESTIONS FOR REPLACING 4" AIR INTAKE HOSE, (FROM MANIFOLD, TO FIREWALL), HAVING TROUBLE LOCATING ITEM. FOR 59 B61. THX, RUSTYI used a little lateral thinking in my B61 and used 4" SCAT/SCEET aircraft hose.It's fairly cheap, can tolerate heat and is reinforced and flexible.What more could a man want??? (well..........)Rod. Quote Proud owner of;1961 Mack B61 prime mover.1981 International ACCO 1810C DualCab Fire Truck Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.