Miller85 Posted September 7, 2016 Share Posted September 7, 2016 I had a driver put a rod through the block on my Etech 460. I have in the barn a E7 Etech 300 that came out of a garbage truck. I know I have to pull the cam and reset the timing but I'm just looking to get the truck back on the road with the engine I have. My question is what is the highest HP that I can bump the 300 to without having to change turbo, injectors, and cam just by getting the ECM reprogrammed? Also where can I get the ECM reprogrammed and how much without having to go through Mack? Thanks C. Miller Quote Link to comment Share on other sites More sharing options...
880joe Posted September 7, 2016 Share Posted September 7, 2016 I think you could go to a 355/380 they have the same torque as the 427 then get some upgraded injectors and run your 460 turbo that should be a pretty good running motor then Quote Quote Link to comment Share on other sites More sharing options...
Miller85 Posted September 7, 2016 Author Share Posted September 7, 2016 Do you know where I could get the ECM reprogrammed besides Mack and how much it would cost? Quote Link to comment Share on other sites More sharing options...
880joe Posted September 7, 2016 Share Posted September 7, 2016 I talked to Heavy Diesel Tunes 309 781 1587 i think it was around 1500 dollars. I have not tried it yet but i others on here have used them maybe the will chime in on there results Quote Link to comment Share on other sites More sharing options...
Miller85 Posted September 7, 2016 Author Share Posted September 7, 2016 Do you have any part numbers on them injectors? Or can i change the tips on the ones i have? Thanks for the help Miller Quote Link to comment Share on other sites More sharing options...
880joe Posted September 7, 2016 Share Posted September 7, 2016 I have been getting my injectors from K&S Diesel out of Schofield WI 800 535 0172 they were around 90 dollars a piece exchange last set I bought, Call and talk to Jason i think they are making 50,75,and 100hp injectors. I also got a set from Antrim Diesel i think they were about 105 each Quote Link to comment Share on other sites More sharing options...
Mackpro Posted September 7, 2016 Share Posted September 7, 2016 Make sure both engines are the either ETECH's or CCRS ( 2002-2003). Use the turbo and injectors and engine ECM off the 460 ( of course off-set key way if ETECH). Rest of the engine is the same regardless of HP. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.