joes mack Posted January 22, 2016 Share Posted January 22, 2016 How do you bleed the air out of the steering system on a CF 600 ? we had to move one of our trucks around to put tire chains on it today and the steering was hard to turn almost like it was locked until I revved the engine up pretty high and then it started steering fine I shut it down and checked the oil in it and almost put a gallon in it and now you have to rev it up to get it to steer when you first start it. I hope its not something worse than air locked. thanks joe Quote Link to comment Share on other sites More sharing options...
m16ty Posted January 22, 2016 Share Posted January 22, 2016 Usually you can just turn the wheel lock to lock a few times and get all the air out.I just blew a PS hose on my RD822 and dumped all the fluid. I just replaced the hose, filled the reservoir back up, cycled the system a few times, and was good to go. Quote Link to comment Share on other sites More sharing options...
joes mack Posted January 22, 2016 Author Share Posted January 22, 2016 I tried that but might not of done it enough ill try it some more tomorrow if the ice and snow don't keep me in Quote Link to comment Share on other sites More sharing options...
41chevy Posted January 22, 2016 Share Posted January 22, 2016 Turn the wheel very slow to bleed the air out and not cause it to foam. Paul Quote "OPERTUNITY IS MISSED BY MOST PEOPLE BECAUSE IT IS DRESSED IN OVERALLS AND LOOKS LIKE WORK" Thomas Edison “Life’s journey is not to arrive at the grave safely, in a well preserved body, but rather to skid in sideways, totally worn out, shouting ‘Holy shit, what a ride!’” P.T.CHESHIRE Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.