CharlieK Posted February 5, 2015 Share Posted February 5, 2015 Hey Folks! I posted a couple of these tag pictures before, but... Is this the tool I need (okay, can probably do it without it) to put in my new rear main seal/wear ring? Quote Link to comment Share on other sites More sharing options...
gearhead204 Posted February 5, 2015 Share Posted February 5, 2015 see if your dealer will rent you the tool, some will but it may take a large deposit to guarantee its return. Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted February 5, 2015 Share Posted February 5, 2015 That is the tool I have and a year or so it cost 518.00 dollars but do not try to install the seal with out the installer.Unless you just love pulling the trans out again.Ever one has tryd to install the seal with out it and its not worth trying. Quote glenn akers Link to comment Share on other sites More sharing options...
BAD DOG Posted February 7, 2015 Share Posted February 7, 2015 I rented the seal tool from my Mack Dealer when I put one in my E9. That same tool does E6 E7and E9. I wouldn't try puttin a rear main seal in without the tool too hard to keep straight without tool. You'll ruin the seal without it. I wish I would have had a friend take some measurements off the tool I remted so he could make me one, because that tool is around $700 to buy here because I priced one out. I wanted to buy one but not at that price. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.