Jump to content

2004 Mach CH613


monsturfleet
 Share

Recommended Posts

Did you have VMAC III software? If so go into service, monitor parameters and click on boxes eecu power and vecu power and check to see if both ecu's have power. If no power check your fuses. Or plug in an another VECU. Use a test vecu or a sister truck vecu. The vecu is located on in front of the passager seat behind the kick panel. Basically behind the metal plate where your feet would rest. They are easy to remove and install. If the truck starts with a different VECU replace the vecu. You can do the samething with the eecu just to make sure its not bad.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...