pupper Posted February 16, 2012 Share Posted February 16, 2012 What is the easiest way to adjust the rack? Truck sat for a long time and a hammer and punch were used to free the rack. I believe the barrels are not in sync with the rack. Truck runs, but will not shut down with the fuel shut off. All the barrels are in a different position. Any ideas? Thanks. Quote Link to comment Share on other sites More sharing options...
Rob Posted February 16, 2012 Share Posted February 16, 2012 What is the easiest way to adjust the rack? Truck sat for a long time and a hammer and punch were used to free the rack. I believe the barrels are not in sync with the rack. Truck runs, but will not shut down with the fuel shut off. All the barrels are in a different position. Any ideas? Thanks.What is the easiest way to adjust the rack? Truck sat for a long time and a hammer and punch were used to free the rack. I believe the barrels are not in sync with the rack. Truck runs, but will not shut down with the fuel shut off. All the barrels are in a different position. Any ideas? Thanks.Pull it off the engine and send it into a pump shop. I don't think the barrels are "out of sync" with each other as they are a mechanical connection but anything is possible.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment Share on other sites More sharing options...
theakerstwo Posted February 17, 2012 Share Posted February 17, 2012 If it is a robert Bosch the barrels can be turned by loosen the two mounting bolt and twisting. That is the way they are calibrated to each other. But i can asure you if the rack is that tight you do not want to try and start it. So as Rob has stated get to the rebuilder. Quote glenn akers Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.