pupper

What is the easiest way to adjust the rack? Truck sat for a long time and a hammer and punch were used to free the rack. I believe the barrels are not in sync with the rack. Truck runs, but will not shut down with the fuel shut off. All the barrels are in a different position. Any ideas? Thanks.

Hey Lmack, Thanks for the reply. The throttle and fuel shut off are good. I did put a manuel shut off in the line in case of a run away. Don't know what else to try ?

1988 R MODEL E6. Had a stuck rack, freed it up using techniques listed here. Truck starts, but will not shut down with fuel shut-off. Rpm also increases when engine is started. Plungers dont appear to be stuck and the barrels rotate. I also pulled the govenor off and it all seems to be operating properly. When I ran the truck with the govenor cap off, the lever moves from full fuel on start, to idle position. The truck will not idle though