anybody replace the rubber stops on their front springs

[macattack]

gonna replace the rubber bump stops that sit above the top plate on the front springs. this is on an mr 688s truck. one rubber looks a little weak.

any tips on doing this? doesnt really look like too tough of a job.

thanks

[Rob]

gonna replace the rubber bump stops that sit above the top plate on the front springs. this is on an mr 688s truck. one rubber looks a little weak.

any tips on doing this? doesnt really look like too tough of a job.

thanks

gonna replace the rubber bump stops that sit above the top plate on the front springs. this is on an mr 688s truck. one rubber looks a little weak.

any tips on doing this? doesnt really look like too tough of a job.

thanks

Torch the old one off and bolt the new one in it's place. Most of them you cannot unbolt the old ones as the steel fastener will spin in the rubber due to corrosion.

Rob

[Mike]

Those things make a good Torch Ball. Invite neighbors over and ya throw them on fire to one another. Your to catch those Torch Balls bare handed and quickly throw them back to another neighbor. The person that throws and catches the most Torch Balls is the winner.

mike

[macattack]

thanks guys. time to fire up the bbq.

[Olivetroad]

thanks guys. time to fire up the bbq.

NO! You are not supposed to eat the rubber -

[macattack]

nah just gonna heat up the rubbers. may as well have a steak or two also/