leversole Posted June 25, 2011 Share Posted June 25, 2011 Looking for info on this type of seat...brand? model? Is it an air seat or spring? Mack only or many other trucks...I think I could shorten the bottom frame and make it work for my truck...If I could find one!Thanks Quote Link to comment Share on other sites More sharing options...
fifth wheel Posted June 25, 2011 Share Posted June 25, 2011 Bostrom, T Bar, spring.FW Quote Link to comment Share on other sites More sharing options...
vision386 Posted June 25, 2011 Share Posted June 25, 2011 Yup! Bostrom T bar,spring seat,found in many different makes of trucks,but easily adapted to a B-model cab..........Mark Quote Mack Truck literate. Computer illiterate. Link to comment Share on other sites More sharing options...
Rob Posted June 25, 2011 Share Posted June 25, 2011 They are on ebay quite a bit. Around $300.00 new in black covering. Very good seat.Heavy SOB's to lift and carry by oneself.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment Share on other sites More sharing options...
Mike Posted June 25, 2011 Share Posted June 25, 2011 They are on ebay quite a bit. Around $300.00 new in black covering. Very good seat.Heavy SOB's to lift and carry by oneself.Rob I sure would like to know how to find out where on e-bay to look for this item. I need one. Makes me curious about the one that Barry sells at Watts. mike Quote Link to comment Share on other sites More sharing options...
Rob Posted June 25, 2011 Share Posted June 25, 2011 I sure would like to know how to find out where on e-bay to look for this item. I need one. Makes me curious about the one that Barry sells at Watts. mikeNone listed on ebay tonight. Here is a link to a vendor:http://www.durhamseats.com/bostrompages/vikingtbar.htmlRob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment Share on other sites More sharing options...
vision386 Posted June 25, 2011 Share Posted June 25, 2011 Hey Mike,check out this website,i have personally dealt with this vendor for seats and parts over the years,real good guys,that know their S*IT, they still carry the Bostrom "Viking" T-bar seats in low profile,not the cheapest guys around mind you,but best in knowledge and stock (in my opinion) if you don't mind dealing with "Jersey Yankees" LOL..............Markhttp://www.suburbanseats.com/p-bostrom_seats-viking_LP_truck_seat.aspx?catid=15 Quote Mack Truck literate. Computer illiterate. Link to comment Share on other sites More sharing options...
Rob Posted June 25, 2011 Share Posted June 25, 2011 Hey Mike,check out this website,i have personally dealt with this vendor for seats and parts over the years,real good guys,that know their S*IT, they still carry the Bostrom "Viking" T-bar seats in low profile,not the cheapest guys around mind you,but best in knowledge and stock (in my opinion) if you don't mind dealing with "Jersey Yankees" LOL..............Markhttp://www.suburbans...t.aspx?catid=15Both of mine come from them. Not bad to deal with in my opinion.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment Share on other sites More sharing options...
Mike Posted June 25, 2011 Share Posted June 25, 2011 Hey Mike,check out this website,i have personally dealt with this vendor for seats and parts over the years,real good guys,that know their S*IT, they still carry the Bostrom "Viking" T-bar seats in low profile,not the cheapest guys around mind you,but best in knowledge and stock (in my opinion) if you don't mind dealing with "Jersey Yankees" LOL..............Markhttp://www.suburbanseats.com/p-bostrom_seats-viking_LP_truck_seat.aspx?catid=15 Thanks Rob, I have seen that seat but did not know that it would work in that truck on that original seat frame. As long as it is not outragious in cost, I can hang it. Yea Mark I can do that, if they are as nice a people as Kevin All is from Nu Yok, then I have noooo problem. Do they like new crisp bills or wrinkled ones with cut marks and stuff written on them? LOL I'll start my printing press up later and turn out some new ones tonight. mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.