diggin dirt Posted April 11, 2011 Share Posted April 11, 2011 my em6 285 had a wear ring, i bought a complete victor reinz gasket set and the seal in it is a cr59999, it is a really tight fit with no wear ring. has any body had any experiance with this? Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted April 11, 2011 Share Posted April 11, 2011 my em6 285 had a wear ring, i bought a complete victor reinz gasket set and the seal in it is a cr59999, it is a really tight fit with no wear ring. has any body had any experiance with this?Yes you could and may still be able to get a seal that rides on the crank but the one with a wear ring is a set up to save the crank or if crank has a wear ridge in it the wear ring will take care of the wear on the crank. Quote glenn akers Link to comment Share on other sites More sharing options...
diggin dirt Posted April 12, 2011 Author Share Posted April 12, 2011 yes, i just wanted to make sure that i wasnt messing up using that cr seal. i'd rather mess with that wear ring after the crank is grooved. it just seemed the cr seal fit really tight and would burn up even though i oiled it and the crank. Quote Link to comment Share on other sites More sharing options...
Mike Posted April 12, 2011 Share Posted April 12, 2011 yes, i just wanted to make sure that i wasnt messing up using that cr seal. i'd rather mess with that wear ring after the crank is grooved. it just seemed the cr seal fit really tight and would burn up even though i oiled it and the crank. Yes that is another great time to get the Vaseline out when your doing assembly work. Right Glenn? mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.