Jump to content

Fault Codes


Recommended Posts

I recently realized by holding the mode button and the trip resest button at the same time on our 05 Granites it will display fault codes on the odometer readout. Most of our trucks will display "no fault" after letting go of the buttons, but a couple display codes, for example 5050-14? Under the code, no matter what the code is, it also says M-136. What are these codes, and how do I determine what they mean?

Link to comment
Share on other sites

I recently realized by holding the mode button and the trip resest button at the same time on our 05 Granites it will display fault codes on the odometer readout. Most of our trucks will display "no fault" after letting go of the buttons, but a couple display codes, for example 5050-14? Under the code, no matter what the code is, it also says M-136. What are these codes, and how do I determine what they mean?

MID 136 is ABS.

You can search for Bendix or Wabco fault codes on the internet to see what you have.

If you don't show a fault in the cluster they are probably inactive.

Link to comment
Share on other sites

I recently realized by holding the mode button and the trip resest button at the same time on our 05 Granites it will display fault codes on the odometer readout. Most of our trucks will display "no fault" after letting go of the buttons, but a couple display codes, for example 5050-14? Under the code, no matter what the code is, it also says M-136. What are these codes, and how do I determine what they mean?

Mack 3P is right, the MID 136 means ABS problem. The 5050-14 is probably really a "S" 050-14 which means SID 50 and FMI 14 If I was at work I would have my ABS book and could tell ya what it means.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...