sworsey Posted February 5, 2010 Share Posted February 5, 2010 I'm looking for, and willing to pay decent $$ for a Pre 1975 R series or F series Mack Radiator. Doesn't have to be in good condition? Will pay premium $$ if it has original felt type gasket material between top tank and core header.Sean Quote Link to comment Share on other sites More sharing options...
fifth wheel Posted February 5, 2010 Share Posted February 5, 2010 Why is the gasket so special? Quote Link to comment Share on other sites More sharing options...
Rob Posted February 5, 2010 Share Posted February 5, 2010 Now this a strange request but there is not enough information offered. What type of truck are you needing this from? Noting that you are from California, are you needing a radiator from a "Western" Mack, or standard Mack as the core width, and length are different. I cannot fathom someone wanting to reuse this gasket as they are mashed flat and will not provide a dependable seal to a fresh core without a lot of silicone. This offers a marginal and temporary repair at best.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment Share on other sites More sharing options...
joe118800 Posted February 9, 2010 Share Posted February 9, 2010 possibly for the un rodded original copper core ? Scrap dollars? Quote Link to comment Share on other sites More sharing options...
Rob Posted February 9, 2010 Share Posted February 9, 2010 possibly for the un rodded original copper core ? Scrap dollars?Don't know. Very unusual request.Rob Quote Plodding along with no job nor practical application for my existence, but still trying to fix what's broke. Link to comment Share on other sites More sharing options...
theakerstwo Posted February 9, 2010 Share Posted February 9, 2010 I have a good 1966 R rad and i have a 1966 or 67 F rad. So give me a PM and i will tell you how they can be yours. No leaks and no bent fins in core.Some bugs but they can be wasked out. Quote glenn akers Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.