Guest Macks and Brockways Posted June 29, 2006 Share Posted June 29, 2006 Where can I find information on the ratios on the different transmissions. Manly looking for the t2000 series stuff but would not mind the older stuff also. Do any of the t2000 series have two overdrive ratios, I read elsewhere that the final ratio was .60 on most but thats a jump from 1-1, did any have say a .8 ish next to top gear? Thanks Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted June 29, 2006 Share Posted June 29, 2006 I belive the T200 sieres (T2050,T2060,T2070 etc...) have a .69 overdrive .If no one can say thats a solid for shure answer. I can go check my books for you.Trent Quote Link to comment Share on other sites More sharing options...
Superdog Posted June 29, 2006 Share Posted June 29, 2006 The T2050 and T2060 is .60,T2090,T2130,and T2180 is .71,T2100 is .77I'd have to get my book out for the rest. Quote Link to comment Share on other sites More sharing options...
David Posted June 30, 2006 Share Posted June 30, 2006 The 5,6,7,& 8 speeds are all .6 overdrives. They all are also direct in the next to high gear. Most trucks with these trans have 5.73 rears. They are like driving an old 6sp 2 stick. You wind em up tight and then wait for the tach to drop to 1300 to find the next gear. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.