John3406
-
Posts
89 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by John3406
-
Not sure what they might be worth. Shoot me an offer. Or if you have a mechanical pump and lined to trade
-
Have a pump fuel lines and econovance off a running e7. Would also trade for good mechanical pump and fuel lines. Thanks
-
Looking for mechanical injection pump for e7. Also need fuel lines . Thanks
-
Just looking at it it looks big enough
-
Thanks guys. Was thinking about putting a 3406e cat in one of my superliners. Trying to decide if radiator is big enough. I think it is
-
Did all superliners use the same radiator regardless of engine used? Thanks
-
Its sold already
-
If i had time to go to Georgia id buy it tomorrow
-
I dont know about the ambac. I have only messed with bosch pumps
-
It was definitely an upgrade compared to the factory turbo. With fuel plate ground and slid all the way forward it runs strong. Spools fast and as long as you keep the manifold pressure up the egts never get high
-
I think antrim diesel.
-
Holset hx50. 3580251. You have to weld a flange on it to match the elbow going to the charge air cooler. Runs great. Had one on mine at least 150 thousand miles
-
I have a strong running e6 that will hang with the big cats in the hills but both heads are leaking now and im sure it will break the block or crank sooner or later. But its been running that way a long time
-
What i would do. Right or wrong is start with 454 spec pistons and cam. Then put a mechanical pump on it and grind the fuel plate and slide it forward or remove it and probably a hx55 turbo. Bigger nozzles. I bet 600 will be easy. How long it will last who knows.
-
Bosch pump?
-
Thats a vmac looks like. Im sure i can put mechanical pump on it. Probably have to change cam pistons injectors and turbo to bump the hp up. Ill keep it in mind
-
Looking for a e7 400 mechanical with jakes. Complete.
-
1983 Mack Superliner auction
John3406 replied to BOBWhite's topic in Antique and Classic Mack Trucks General Discussion
Reyco. Rough riding. I have 2 trucks on reyco and no one will drive them. They ride rougher then camelback and hendrickson rubber block. -
1983 Mack Superliner auction
John3406 replied to BOBWhite's topic in Antique and Classic Mack Trucks General Discussion
Its got the worst suspension ever made on it -
Different here. We can go to 96000 lbs but you have to be a certain lenght. Like 61 foot from center of steer to center of rear trailer axle. And you need 7 axles. But you cant go over 34 thousand lbs on drives . So even if you have 52 rears 34 is all your allowed
-
My thoughts exactly. I run 96 thousand with a 12 speed. A 6 wouldn't be good unless there was no hills at all
-
I never met a dot officer that was smart enough to tell a 38 rear from a 44 rear. They will look at tire ratings and thats about it
-
If you decide to pass on the superliner let me know. Im looking for another one. Id swap out that 6 speed for sure tho.
-
E7 350 has warm egt’s with 4” turbo back exhaust
John3406 replied to rhinoo's topic in Engine and Transmission
Nevermind i see you tweaked the pump so it must be mechanical. Whats your timing set at? -
E7 350 has warm egt’s with 4” turbo back exhaust
John3406 replied to rhinoo's topic in Engine and Transmission
Mechanical or electronic motor?
BMT Forum Logo
