Jump to content

polracer01

Bulldog
 View Profile  See their activity

  • Posts

    133

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by polracer01

  1. polracer01
    Yeah been all over truck paper and craigslist 91 or older Mackey 94 is to new looking for a truck like the one u drive just with a dump
  2. polracer01
    This is true I got a 78 dm that thinks it is an rd but it's not thank you for the offer and good luck selling it iam sure it will make someone a good truck
  3. polracer01
    Thanks for the offer not interested in a dm thanks though
  4. polracer01
    I probably should put this in want ad but figured more people would see it here... looking to buy another truck 1987 to 1991 rd688 or rd690 dump truck tandem or triple axle doesn't matter... needs to be ready to work no projects... if anybody sees one please let me know iam looking anywhere I can... perfer something in the northeast to mid atlantic... thanks paul
  5. polracer01
    26k to 27k empty... permitted for 67k gross... I think I deleted it so I could make room for other pics
  6. polracer01
    Nope use to but to busy with just maintaining equipment don't really have time
  7. polracer01
    K thanks
  8. polracer01
    Want to add more photos but says my max total is used up any suggestions
  9. polracer01
    Our brandon boxes hold up very well I think that box is 5yrs old...we run 11r22.5 on drives and drop axle 385 on steer
  10. polracer01
    Cost around 2000 for the hubs drums and brakes bought a couple converter dollies from a local trucking company for next to nothing that had the aluminum rims on them... Yeah looks to be good so far all the girls have a home to go to... just about done with our new superliner so will be posting updates on her very soon
  11. polracer01
    One of our projects this winter switch rear ends over to hub piloted with aluminum wheels gives it a differant look... I know a lot of people like to keep the spokes but for the price to replace a spoke not making much since to keep them plus the maintenence aspect is much easier with hub pilots
  12. polracer01
    I think 91 was last year for old hood on rd's
  13. polracer01
    The dot date on the sidewall will tell you how old the casing is
  14. polracer01
    Yeah we do alot of change overs was just trying to make it easier on him been beating him up really hard if he had a Vin to run that was built at the factory with dual stacks all the part numbers would be there thanks for the reply hancock
  15. polracer01
    Come to find out our superliner was built with single stack looking to add duals does anybody know the mack part numbers for the setup or if you happen to own one with an e7 400 dual stack I would like to know if I could get the last 6 numbers of the Vin so I could have my locale dealer look it up and that would give me everything I need to know thanks
  16. polracer01
    That was a spare I could of done without
  17. polracer01
    So we are finally finishing running wiring harnesses fuel lines and battery cables seems like it was never going to end... I figured it was time to drop oil pan and replace gasket that was leaking bad and to my surprise I found some spare parts... previous owner had dropped a push rod replaced it then never pulled oil pan to retrieve old one... guess he didn't care to check and see if there was anymore damage luckily there wasn't
  18. polracer01
    Other dog the pic of the two macks is the lot where we just picked up our superliner was part there on the hill behind the trucks I didn't see the girl standing on the side of rt 15 when we where there though
  19. polracer01
    Here is a pic of back to front not use to buying a truck without rust jacking between frame rails usually have to reframe when we get them but not this one
  20. polracer01
    Spent some time with the old man in the garage over the weekend made out pretty good new starter installed with all new battery cables and left headlight bucket in
  21. polracer01
    Multicolored white to purple to black whatever color they had to make splices with at the time
  22. polracer01
    Lol... Yeah that was the easy part running all new wiring harness now that was a differant story gonna have nightmares of being surrounded by endless strands of wire
  23. polracer01
    New headlight bucket installed on right side waiting for left one to arrive
  24. polracer01
    Making new support brackets for dash panels in first pic... exhaust manifold all on waiting to finish flushing cac before installing new turbo
  25. polracer01
    Here are some update photos...cracked center section of exhaust manifold and bad compressor wheel on turbo... can't believe someone left a nut or bolt inside the intake runner

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...