Jump to content

TimberJack

Bulldog
 View Profile  See their activity

  • Posts

    142

  • Joined

  • Last visited

 Content Type 

Everything posted by TimberJack

  1. TimberJack
    GOOG did you use their turbo along with injectors?
  2. TimberJack
    Thanks for the info. I will give them a shout.
  3. TimberJack
    Has anyone on here ran the Rochester injectors and turbo setup on their E7? Thanking about buying there stage 2.5 injectors and turbo but would like some input.
  4. TimberJack
    Can anyone tell me the correct turbo that’s supposed to be on my 2003 CH? It has a 427 and the last 6 of Vin 150015. The turbo that’s on it right now part # 173385.
  5. TimberJack
    Ok thanks y’all for the input.
  6. TimberJack
    Yeah I need to replace the Actuator and really was hoping I could do it with out having to take to dealership. I have a new Actuator.
  7. TimberJack
    Is there anyway to install a turbo actuator with out a computer on a MP8?
  8. TimberJack
    Installed a new steering box and power steering pump on my 2011 CHU and it seems to be stiff when I turn left compared to turn right. Someone told me it needs to be adjusted but I’ve never done that before.
  9. TimberJack
    Looking for a 2008 up replacement cab. Must be daycab.
  10. TimberJack
    Will check it out thanks.
  11. TimberJack
    2003 427, if you stay with the stage 2 you will be fine. Mine preforms best around 1400-1600 rpm
  12. TimberJack
    (S400) # 23504966. I put stage 2 injectors and mine runs like a different truck. I tried stage 3 but was to much heated up to quick.
  13. TimberJack

    CHU cab

    TimberJack posted a topic in Parts Wanted

    Looking for a 2008 up replacement cab. Must be daycab.
  14. TimberJack
    Did you check the plugs for oil at the ECM had one do that. Ran great until it got hot then ran like crap. I changed harness and it fixed problem
  15. TimberJack
    I’ve got a s400 for a 60 series Detroit on my E7 with stage 2 injectors. Does great.
  16. TimberJack
    2009 CHU MP8 starts and idles fine, even revs good. When you get it out on the road does great shifting through the low side but once you get to high side it’s like you lose throttle but it’s on the floor. Pulled code and showing engine fuel delivery pressure. I check valve on the front of the head and the plunger is moving freely. I also check fuel filter house bc I had one that was sucking air on the backside of primer but it seems to fine. Could it possibly be the cups? I looked in fuel tank to see if there were any bubbles coming out on the return and nothing.
  17. TimberJack
    2008 CHU MP8. Going through injectors like crazy. You can put a new one in and it might last 3 to 6 months. Could this be a wiring harness problem?
  18. TimberJack
    It was active, engine seemed to lost a lot of power. Have to drop gears pulling a empty log trailer that I never had to do before.
  19. TimberJack
    Can you start the truck by jumping it on the starter?
  20. TimberJack
    2003 E-tech seemed to lose power and had a skip. Check the codes and had a 8-6 # 6 EUP and a 8-9 Solenoid Boost Voltage. What should I check for the solenoid boost problem?
  21. TimberJack
    I’ve never called the dealer. Figured they would be to high so I’ve been look online for a take off.
  22. TimberJack
    I’ve got a 2004 AC engine sitting in my building and was wondering if the Jakes will work off it on a 2003 E-Tech? Ran across a heck of a deal on a 2003 CH613 and it has no Jakes. Was hoping if I bought it I could use what I had instead of buying a new kit.
  23. TimberJack
    Mine did the same thing. Took it to Mack and they pulled the oil temp plug on the driver side of oil pan and cleaned the oil out of it an it started right up. They told me it was a ground problem from the oil and said I need a new oil temp sensor. They told me the grounds has something to do with the ECM to the starter. Sounds crazy but it fixed my problem. Wished I would’ve knew that before I replaced key switch, starter relay and starter.
  24. TimberJack
    I’ve got a 2008 CHU613 that has been turned over. Been looking at cabs, my question is what’s the difference in a CX cab? Will it work on my frame? I’ve noticed in some they say CX set back axle cab.
  25. TimberJack
    I also changed the module behind the plate in the passenger side floor board.

BigMackTrucks.com

BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.

Our Vendors and Advertisers

Thank you for your support!

Mack Related Links

Popular links

BMT Forum Logo

HTML tutorial
×
×
  • Create New...