TimberJack
-
Posts
143 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by TimberJack
-
I’ve had one with a Detroit turbo. Seemed to do pretty good. Didn’t know much about it. Truck was set up that way when I got it. The id tag was missing off the side of the turbo so I have no clue was model it was. The truck I’ve got now is a 2003 CH with a 427 and it’s a slug. It’s got a 8LL with 4:17 rears.
-
GOOG did you use their turbo along with injectors?
-
Thanks for the info. I will give them a shout.
-
Has anyone on here ran the Rochester injectors and turbo setup on their E7? Thanking about buying there stage 2.5 injectors and turbo but would like some input.
-
Can anyone tell me the correct turbo that’s supposed to be on my 2003 CH? It has a 427 and the last 6 of Vin 150015. The turbo that’s on it right now part # 173385.
-
Ok thanks y’all for the input.
-
Yeah I need to replace the Actuator and really was hoping I could do it with out having to take to dealership. I have a new Actuator.
-
Is there anyway to install a turbo actuator with out a computer on a MP8?
-
Installed a new steering box and power steering pump on my 2011 CHU and it seems to be stiff when I turn left compared to turn right. Someone told me it needs to be adjusted but I’ve never done that before.
-
Looking for a 2008 up replacement cab. Must be daycab.
-
Will check it out thanks.
-
S400 Turbo too big for 1991 E7-350????
TimberJack replied to BucketTrucker688's topic in Engine and Transmission
2003 427, if you stay with the stage 2 you will be fine. Mine preforms best around 1400-1600 rpm -
S400 Turbo too big for 1991 E7-350????
TimberJack replied to BucketTrucker688's topic in Engine and Transmission
(S400) # 23504966. I put stage 2 injectors and mine runs like a different truck. I tried stage 3 but was to much heated up to quick. -
Looking for a 2008 up replacement cab. Must be daycab.
-
Did you check the plugs for oil at the ECM had one do that. Ran great until it got hot then ran like crap. I changed harness and it fixed problem
-
S400 Turbo too big for 1991 E7-350????
TimberJack replied to BucketTrucker688's topic in Engine and Transmission
I’ve got a s400 for a 60 series Detroit on my E7 with stage 2 injectors. Does great. -
2009 CHU MP8 starts and idles fine, even revs good. When you get it out on the road does great shifting through the low side but once you get to high side it’s like you lose throttle but it’s on the floor. Pulled code and showing engine fuel delivery pressure. I check valve on the front of the head and the plunger is moving freely. I also check fuel filter house bc I had one that was sucking air on the backside of primer but it seems to fine. Could it possibly be the cups? I looked in fuel tank to see if there were any bubbles coming out on the return and nothing.
-
2008 CHU MP8. Going through injectors like crazy. You can put a new one in and it might last 3 to 6 months. Could this be a wiring harness problem?
-
It was active, engine seemed to lost a lot of power. Have to drop gears pulling a empty log trailer that I never had to do before.
-
MP8 ENGINE NO CRANK WITH KEY SWITCH
TimberJack replied to jimmycarter's topic in Engine and Transmission
Can you start the truck by jumping it on the starter? -
2003 E-tech seemed to lose power and had a skip. Check the codes and had a 8-6 # 6 EUP and a 8-9 Solenoid Boost Voltage. What should I check for the solenoid boost problem?
-
I’ve never called the dealer. Figured they would be to high so I’ve been look online for a take off.
-
I’ve got a 2004 AC engine sitting in my building and was wondering if the Jakes will work off it on a 2003 E-Tech? Ran across a heck of a deal on a 2003 CH613 and it has no Jakes. Was hoping if I bought it I could use what I had instead of buying a new kit.
-
MP8 ENGINE NO CRANK WITH KEY SWITCH
TimberJack replied to jimmycarter's topic in Engine and Transmission
Mine did the same thing. Took it to Mack and they pulled the oil temp plug on the driver side of oil pan and cleaned the oil out of it an it started right up. They told me it was a ground problem from the oil and said I need a new oil temp sensor. They told me the grounds has something to do with the ECM to the starter. Sounds crazy but it fixed my problem. Wished I would’ve knew that before I replaced key switch, starter relay and starter. -
I’ve got a 2008 CHU613 that has been turned over. Been looking at cabs, my question is what’s the difference in a CX cab? Will it work on my frame? I’ve noticed in some they say CX set back axle cab.
BMT Forum Logo
