kscarbel2

Okay, your wife was given a [meaningless Volvo Group global part number] 20705740 teflon rear main seal, which is the same as the old "Mack" part number 446GC310P10. (That plastic band is not a wear band). But it sounds like you'd rather have a 57GC186A.

In 11th hour bid for votes, Democrats embrace $15-an-hour minimum wage CNN / July 9, 2016 Democrats amended their party platform late Friday to call for a $15-an-hour federal minimum wage -- a victory for Bernie Sanders, who is fighting to push the party leftward before his expected endorsement of Hillary Clinton. The amendment calls for the change "over time" -- less specific language than Sanders had wanted, making it a concession for Clinton. But it is much more specific than the previous draft of the platform, which said Americans "should earn more than $15 an hour" but didn't mention the federal minimum wage specifically. The change came at the Democratic National Committee's platform meeting in Orlando. They're set to finalize the party's policy positions -- and attempt to bridge the gaps between Clinton and Sanders -- ahead of the Democrats' convention in Philadelphia later this month. The amendment calling for the $15-an-hour federal minimum wage was introduced by former Ohio State Senator Nina Turner, a Sanders supporter. "Raising the federal minimum wage sets the moral standard in this country that we as Democrats affirm over and over again that ensuring that we don't leave a sister or a brother behind is how we roll," Turner said. "Raising the federal minimum wage is the beginning of creating an America as good as it's promise." Mary Kay Henry, the international president of the Service Employees International Union, proposed adding language that included the phrase "over time." Both were adopted without a fight -- the product of hours of negotiations between the Clinton and Sanders camps at an Orlando hotel on the first day of the two-day meeting. The minimum wage language pushes Clinton left of the position she's taken on the campaign trail. She has supported a $12-an-hour federal minimum wage, as well as local efforts to set higher minimum wages in places like New York and California. Another big fight looms over the Trans-Pacific Partnership. Sanders' camp has pressed for language that would call for the 12-country trade deal to never receive a vote in Congress -- after a new president is sworn in or in a lame-duck session beforehand. That, though, would be a stinging rebuke of President Barack Obama, whose administration negotiated it.

Did your wife receive a 446GC310P10 ? I assume you want the wide wear band seal kit, 57GC186A. The narrow wear band kit, 57GC187A, was for older crankshafts with an oil slinger.

The cultural decay and declining standards of behavior in America. That is the situation before us. Frankly speaking, I love my country. And thus, I have been saddened for many years as I watch decay and decline. I am not alone. The events taking place in American society today are shocking.......and shameful. The definition of “socially acceptable morals and values” is clear to any ordinarily prudent individual. However, unlike the automobile and truck which have “evolved forward”, from primitive machines into the highly sophisticated ones we know today, American society appears to be “regressing”, moving away from the signature morals and values that for decades defined America, and made our great country the envy of the world. The American government, I feel, inherently bears significant responsibility in guiding the positive forward development of American society. However, I don’t believe the U.S. government has actively tried to influence the forward development of American society since the administration of Dwight D. Eisenhower (1953-1961). Over the last 20 years, we have observed what to us in our youth was unthinkable. Who on this forum in their teenage years would have walked into a school and taken the life of another human being. The thought never crossed our minds. But the minds of recent generations are clearly different, indicating that we as a people and government combined are seriously failing in our responsibility to lead society. We have a responsibility to effectively raise the bar of morals and values for each new generation of Americans. However, and clearly so, society is plunging to a lawless state that in some aspects is already out of control. And yet, our government of the people does not speak of this crisis, nor address it. When tragic events occur, leadership utters politically correct words like "troubling" and "heartbreaking", and then resumes their normal routine. At some point several decades ago, the values that shaped our morals and values stopped being taught to a sizable portion of the masses, and we’re seeing the effects today in the form of senseless tragedies. Our government refuses to speak of (acknowledge) America’s crisis in society, apparently taboo in Washington, and has taken no steps to address it. But today, for the first time, the media (U.S. News and World Report) actually put it in print......"the battle against cultural decay and declining standards of behavior [in America]". I believe this the first time major media has spoken on this taboo subject.. An American society with strong moral principles and values is not an option........it is a necessity to safeguarding our future. America has become unraveled more since Ferguson, when a bully and criminal was shot by police. He wove his own ending (https://www.washingtonpost.com/politics/new-evidence-supports-officers-account-of-shooting-in-ferguson/2014/10/22/cf38c7b4-5964-11e4-bd61-346aee66ba29_story.html). Rather than call a spade a spade, Washington kowtowed to protesters supporting this bully and criminal, protesters unwilling to advocate that "All American Lives Matter". As people crowed that black lives matter, they looted the stores in their own Ferguson and Baltimore neighborhoods. That speaks volumes. Unless you state that “all lives matter”, you’ve lost all credibility with civilized society. Being an American should no longer be a given……..it should be a privilege, because enjoying the fruits of America’s high quality of life……is a privilege. A United States citizen may lose their citizenship if they are convicted for treason, seditious conspiracy, or advocating violent overthrow of the government. It may be time to begin using this path, revoking the citizenship of those whose ethics, morals and values are not acceptable within American society. Why did the media fail to state the Dallas gunman was black? When an attacker(s) is white and the victim is black, the press nowadays makes a point of reporting color. For example, the tragic South Carolina church killings. However, when the attackers are black and the victims are white, the media no longer mentions color. Why the double standard? Either stop mentioning color, as people are people regardless of color (all lives matter), or mention color in any circumstance.

Veteran charged in Tennessee highway shootings was angry about violence against blacks The Portland Press Herald / July 8, 2016 A black Army veteran who shot indiscriminately at passing cars and police on a Tennessee highway told investigators that he was troubled by police violence against African-Americans, authorities said Friday. It was one of several spasms of violence across the country this week amid boiling tension over policing and race. One woman died and three others, including one police officer, were injured in the rampage early Thursday morning. Meanwhile, police say officers have also been targeted in Georgia and Missouri in the aftermath of two high-profile killings of black men by law enforcement and the Dallas attack, which left five officers dead and seven more wounded. Other departments reported being bombarded with threats and some implemented new policies requiring officers to patrol in pairs. Civilians also have been caught in the fray. The woman who died in Tennessee was a newspaper carrier driving down the highway. The Tennessee Bureau of Investigation said in a news release that initial conversations with the suspect, Lakeem Keon Scott, 37, who is black, revealed he was troubled by the incidents in other states, hundreds of miles away. All those shot were white, police said. Scott, armed with an assault rifle, a pistol and a large amount of ammunition – was wounded in a shootout with police early Thursday and remains hospitalized. Police were not able to interview him until late Friday morning, according to a statement from the Tennessee Bureau of Investigation. Hours before, as Scott was in the hospital, 12 officers were shot at a Black Lives Matter protest in Dallas. Police say the sniper declared he was angry about the police shootings of black men and wanted to exterminate whites. Five of the officers died. In south Georgia, police said one officer was ambushed Friday when he came to an apartment complex to investigate a report of a break-in. Another officer was fired upon by a motorist north of Atlanta. And just outside St. Louis, police say an officer was ambushed during a traffic stop. Scott, who has no criminal history, grew up in New York City and moved to Tennessee fairly recently. His cousin said he has relatives in Tennessee and likely moved there because of a lower cost of living. She said he was in the Army but was injured at some point, collected disability payments and did not have a job. Army spokeswoman Lt. Col. Jennifer Johnson confirmed he served from January 1998 to June 1999. He was a private in the 5th Battalion 5th Air Defense Artillery Regiment, stationed in South Korea. One of Scott’s brothers, Gerard Griffin, said Scott has three brothers and two sisters and often acted as their “protector.” Griffin said his brother “was a little angry” when he came back from the military. “He seemed to be getting more and more frustrated with the condition of black people in America,” Griffin said. One of those wounded was the longtime front desk clerk at a Days Inn hotel, Deborah Watts, who was in serious but stable condition. Investigators say Scott fired first at the hotel. “She is like a family to us,” said Days Inn owner Kiran Patel. “It’s horrible. I don’t know how to explain how horrible.” Newspaper carrier Jennifer Rooney, a 44-year-old mother of two, was on her way to pick up papers for the morning delivery when a bullet struck her. The Bristol Herald-Courier reported that her car careened over a median and crashed through a chain link fence. “I don’t think she had an enemy in her life,” her husband, David Rooney, told the newspaper. “She was the type of person that could have a disagreement with someone and 10 minutes later turn around and help them, and that rubbed off on everybody who she came in contact with.” David Whitman Davis was also injured by flying glass from the gunfire, the TBI said. Officer Matthew Cousins was hit in the leg. He was treated for superficial injuries and released. Scott was stuck by the officers returning fire. He remains in the hospital in serious but stable condition. Griffin said he’s struggling to understand how his brother’s frustration may have led to violence. “Don’t get me wrong, everything he did was wrong,” Griffin said. “I ain’t condoning nothing he did, at all. But frustration, we can all understand that.”

You were initially told by Dallas Police Chief David Brown that at least two snipers fired from an elevated position on police officers minutes before 9 p.m. local time (10 p.m. ET). Authorities called it an "ambush-style" shooting. Dallas Police Chief David Brown is no dummy. He is a graduate of the FBI National Academy and the FBI National Executive Institute, the Senior Management Institute for Police, the National Counter-Terrorism Seminar in Tel Aviv, and the United States Secret Service dignitary protection seminar. Furthermore, he is certified by the State of Texas as a master peace officer and a police instructor. "We believe that these suspects were positioning themselves in a way to triangulate on these officers from two different perches in garages in the downtown area, and planned to injure and kill as many law enforcement officers as they could," Dallas Police Chief David Brown said, noting that some victims were shot in the back. But now, you’re told that just one gunman caused all the carnage. (One can’t help but recall that authorities say Lee Harvey Oswald acted as a lone sniper in 1963 in the murder of President John F. Kennedy. They claim there was no second gunman)

In the aftermath of the Dallas police massacre, black protesters danced with joy over the murder of five fellow Americans and the injuring of 7 others at a 7-Eleven. Watch for it at 0:50 ( A United States citizen may lose their citizenship if they are convicted for treason, seditious conspiracy, or advocating violent overthrow of the government. It may be time to begin using this path, revoking the citizenship of those whose ethics, morals and values are not acceptable within American society. ) .

U.S. News & World Report / July 8, 2016 Life comes at us mostly as a series of simple, little decisions, more often than not binary in nature. Up or down? Left or right? On or off? Trump or Clinton? We should be grateful things can be broken down into easily digestible blocks, because if the last few days are any indication, our culture's capacity for handling anything more nuanced is rapidly evaporating. There's a lot more to the discussion of whether black lives matter and how the police behave than a set of simple choices. Black lives matter. All lives matter. Police lives matter. Human lives matter. Those spoiling for violence in the street, however, feel differently. To them a human life matters as mere political currency, useful in the pursuit of sociological objectives that will uproot the values upon which our republic was founded. To them that's a good thing. Breaking individuals up into groups and then pitting one or more groups against another is the way forward, down the path leading to the destruction of our civic, political and cultural institutions. No rules, just right – to borrow a slogan from the hospitality industry – with right as might makes it. Democracy as practiced by the mob, with no space for dissent and no protection given to dissenters. How we got as far down that road as we have is not an easy thing to explain. We've found ourselves atop thousands of slippery slopes over the last 30 years; we dodged a few but stumbled down others. Now we're picking up speed as the decline is accelerating, much as the late Daniel Patrick Moynihan suggested we would when he coined the phrase "defining deviancy down." Though others would and have argued strenuously against it, it is possible to be gravely concerned about the abuses of power and deadly force we see – or we think we see – on videos bystanders take with their phones and at the same time remain a supporter of the police and the rule of law. In fact, it is not only possible but necessary, if our common civilization is to survive and once again prosper. It is not wrong to suggest the police have too much power, that the training they receive in handling confrontation is too often a lesson in how to provoke the very confrontation they are trying to avoid. After viewing any of the police reality shows that populate basic cable, one wonders how many of them really understand concepts like due process and probable cause. On the other hand, the police are on the front line in the battle against cultural decay and declining standards of behavior [in the United States]. There are people out there for whom the color blue is a trigger to violence, something that was tragically proven Thursday night in Dallas. Yet when the shooting started, they didn't throw down their guns and scatter; no, they rallied to protect the demonstrators (who were themselves in a very real sense protesting the conduct of the police generally) and get them out of harm's way. Courage under fire, grace under pressure – which is what we would like to see from police everywhere and at all times, forgetting that they are all too human, just like the rest of us. This does not excuse it when one of their own abuses what they have been given by virtue of a badge, a gun and the ability to call in reinforcements. This is a power used lightly, as a last resort whenever and wherever possible. When the Black Lives Matter movement and others encourage active resistance to that authority, the die is cast and a vicious circle of death and destruction appears. At the same time, we must stop pretending that those who come up short in these encounters are not innocent bystanders minding their own business and are singled out for scrutiny solely because of the color of their skin. There is no quick, easy solution to these problems. People should be allowed to record interactions with police that involve them or occur in front of them. The police should be held accountable for their behavior at all times and these videos, even when they are misleading, help in that process. The police must show respect to those whom they stop and question, and those who are stopped and questioned must show respect to the police. Black lives in blue uniforms matter just as much as any other and pointing this out, as well as the fact that all lives matter, is not indicative of disrespect and should not be taken that way. We are all created equal and endowed by our Creator with certain unalienable rights. How we exercise those rights reflects the content of our character and we must all be prepared to own it. It will be difficult, especially with the rhetoric as white hot as it currently is and with too much blood in the streets, to revive a spirit of mutual respect and cooperation, but that is the only place true healing can begin.

Thanks. The Primaax is very popular in Australia, particularly on road train prime movers. I suggest it would be an altogether different "air suspension" experience for you than the Neway. It's a heavy duty suspension perfect for logging, but not excessively heavy. http://www.hendrickson-intl.com/Truck/Vocational/Primaax-EX .

Trucks.com / July 7, 2016 Navistar appears to be working on an update of its International ProStar Class 8 semi-truck (the “LT” Series). These spy shots of the new model were taken when the truck manufacturer was testing the vehicle in Colorado near the Eisenhower tunnel on I-70 in late June. The truck was first unveiled in 2006, part of a $300 million development project. Now it looks like Navistar is making changes to the cab, perhaps to improve aerodynamics as the trucking industry gets ready for the final Phase 2 Greenhouse Gas Emissions Standards from the Environmental Protection Agency expected later this year. .

Ex-Navistar CEO fights suit that says he lied to investors Crain’s Chicago Business / July 7, 2016 Daniel Ustian, the former chief executive of Navistar International, is fighting a federal lawsuit that claims he repeatedly lied to investors about the status of an engine technology the truckmaker failed to develop. In a court filing last month, Ustian's legal team sought to dismiss the complaint the Securities and Exchange Commission filed against him in March, stating the agency resorted to "smoke and mirrors" in the suit after failing to find anything substantial against Ustian during a four-year investigation. "Although laced with hyperbole . . . SEC's complaint does not allege that Ustian lied about anything," the filing says. "Rather, with the benefit of hindsight, SEC's real contention is that a host of admittedly true statements should have been coupled with even more cautionary language" about the engine technology and a federal environmental certification process for it. During his tenure as CEO of Lisle-based Navistar from 2003 to 2012, Ustian directed the company to develop an engine technology called exhaust gas recirculation, or EGR for short. Despite spending what the SEC suit said was $700 million on EGR, the product couldn't meet Environmental Protection Agency nitrogen oxide emission standards, which got tougher in 2010. Navistar eventually gave up on the technology, but before doing so, Ustian wasn't truthful about whether EGR was functioning as planned and if the EPA would certify the technology for use in engines, the SEC claimed in its suit against the onetime chief executive at the manufacturer. Ustian even engaged in a "cover-up," according to the suit. Ustian's lawyers said in a June filing in U.S. District Court in Chicago that their client believed EGR was superior to a competing technology called selective catalytic reduction. Ustian made truthful "factual or forward-looking public statements" about the certification process for it, the filing shows. Ustian "never assured that its engines would be certified or predicted the outcome of the process," his legal team wrote in a motion to dismiss the case. "On the contrary, he and the company repeatedly stated that certification might be denied," something that would hurt the company's engine sales. The SEC says the case shouldn't be dismissed, and asked Judge Sara Ellis to deny the motion to dismiss the case, a filing shows. Ustian could not be reached for comment. He has assembled a powerful legal team to defend him, a group that includes Stephen Neal, the Palo Alto, Calif.-based chairman of the law firm Cooley, and Sean Berkowitz, a Chicago-based partner at Latham & Watkins. Neal is known for defending big corporate clients such as General Motors and AT&T, while Berkowitz once prosecuted former executives at Enron when he was at the Department of Justice. Neither could be reached. When the SEC sued Ustian in March, it also agreed to settle a dispute with Navistar itself. The company agreed to pay a $7.5 million fine related to how it handled the EGR technology and certification process. Navistar didn't admit or deny anything related to the SEC's action against it in agreeing to pay the fine. .

Transport Topics / July 7, 2016 Bob Wyatt likes the smallest truck stops, the biggest rigs and the widest spaces. There's nothing like piloting his Freightliner and a 53-foot trailer across the Dakotas, Montana and on to Seattle. "Beautiful drive," Wyatt said. "Nice country." In 51 years at the wheel of a truck, he has rolled through every state in the lower 48. He's been cut off by countless speed-first, safety-second motorists from one end of the country to the other. He's driven nearly 6 million miles — or about 1,400 round trips between Milwaukee and Los Angeles. And he's never had a preventable accident. Which is why Wyatt, who works for Schneider, the Green Bay firm that is among the largest trucking companies in the United States, is being honored by an organization of motor vehicle law enforcement officials from across North America. Wyatt is the 2016 winner of the International Driver Excellence Award conferred by the Commercial Vehicle Safety Alliance. "It was a little bit of a shock," Wyatt said July 5 from the Kwik Trip on Highway 20 in Racine County during a stop on his latest run. "There's a lot of people out there who deserve this as much as I do. And it's kind of humbling, to tell you the truth. I mean, it's nice to be nominated. I just hope I do it justice." Sixty-eight years old, Wyatt is Schneider's most-decorated and longest-tenured driver. Schneider ranks No. 7 on the Transport Topics Top 100 list of the largest U.S. and Canadian for-hire carriers. He's soft-spoken, but with a sly sense of humor. Many truck drivers find that the rigors of the road and the long stretches away from home hurt their marriages. Wyatt, if you take him at his word, says his experience has been just the opposite. The evidence supports his theory: He and his wife, Linda, will mark their silver anniversary in November — thanks in part to longhaul trucking. "If I was home every night, I don't think we'd still be married," Wyatt said. Linda stayed home — the couple live in Springfield, Ill. — and raised three children. She's active in church, works part time taking inventories in supermarkets and enjoys her responsibilities, Wyatt said. "Then when I go home, we can be together, but we always know that I'm leaving again, and it's just worked out really well," he said. Wyatt was a teenager when he started trucking in the mid-1960s. Since then, the typical trailer has grown from 40 feet long to 53, deregulation has reshaped the industry and motorists as a group, Wyatt said, have changed for the worse. "It's their attitudes," he said. "It used to be, 'Well, I'm going to try and stay safe on this trip across country.' Now it's get there as fast as you can, cut off as many people as you can and be the first one there." "You have to watch out," he said. "In my lifetime, I could have run over probably thousands of people if it wasn't for slowing down and braking and trying to guess what they're going to do next." At Schneider, Wyatt is known as a meticulous trip planner and someone who won't be rushed on the road — a positive characteristic some truck drivers find difficult to embrace given the pay-per-mile system that is widespread in the industry. Wyatt has about 5 million miles with Schneider, and he drove trucks for seven years before joining the company. "So with all of that I'm probably closer to 6 [million] than I am to 5 [million]," he said. He admits to getting a few tickets — "You don't drive out here that many years and not slip up once in a while," he said — and he's had motorists hit him "or done something they shouldn't have done, and I was there and involved." But his record is strong enough to merit just the second annual driver award from a group made up largely of state and provincial highway patrol agencies. "We always focus on the bad as law enforcement," CVSA Executive Director Collin Mooney said, "and it's time to also recognize that there are a number of professional truck drivers out there who need to be recognized for a job well done that they do each and every day." Wyatt plans to keep doing it. He still likes trucking, and Linda — again, taking him at his word — is "not too excited" about him retiring. "I'm going to stay out here at least another couple of years," Wyatt said, "Or until I get too old to bother her anymore."

Associated Press / July 7, 2016 "Secretary Clinton said there was nothing marked classified on her emails, either sent or received. Was that true?" South Carolina Rep. Trey Gowdy asked FBI director James Comey. "That's not true," Comey replied. "Secretary Clinton said, 'I did not e-mail any classified material to anyone on my e-mail, there is no classified material.' Was that true?" Gowdy went on. "There was classified material emailed," Comey replied. "There is no consequence, director -- there is no consequence," House Oversight and Government Reform Committee Chairman Jason Chaffetz said, demanding to know why Clinton and her aides do not appear to be paying a price over the long-running controversy. "We are mystified and confused by the fact pattern that you laid out and the conclusions that you reached," said Chaffetz, adding that "the Average Joe" would have been led off in handcuffs had they done what Clinton did. Comey also testified that there were three emails found on Clinton's servers bearing the letter "C" which denotes they were classified, in contradiction of the former secretary of state's statements. But he said it was not clear whether Clinton knew that such a designation denoted classified material, saying "the secretary may not have been as sophisticated as people assume" when it comes to such issues. But Comey testified that Clinton did not lie to the FBI during their year long probe which culminated with her interview with bureau agents on Saturday [???].

Associated Press / July 7, 2016 At the four-and-a-half hour hearing on Thursday, House Oversight and Government Reform Committee Chairman Jason Chaffetz said he would formally ask the FBI to investigate whether Clinton perjured herself in congressional testimony last October by lying to Congress over her email arrangements. The FBI, Comey said, did not investigate Clinton's testimony before the House Benghazi panel last year because Congress had not asked it to. "I think when you come to Congress you need to provide truthful testimony and if you don't provide truthful testimony there should be a consequence," said Chaffetz. "I thought the FBI was looking at this, but evidently, they're not. They weren't looking at it."

Associated Press / July 7, 2016 FBI director James Comey on Thursday refused to say whether or not is still investigating former secretary of state Hillary Clinton on a separate track from the one that the Department of Justice closed Wednesday afternoon. In April, Clinton faced two separate investigations, one related to her use of private email to house classified documents, and another focusing on allegations that she used her position in the Obama administration to raise money for her family’s Clinton Foundation and to generate speaking fees for her husband. On Thursday, Comey refused to comment when the chairman of a congressional committee asked him if the Clinton Foundation was still under scrutiny from federal law enforcement. 'I'm not going to comment on the existence or nonexistence of any other ongoing investigations,' Comey told House Oversight Committee chair Jason Chaffetz, a Utah Republican. Comey also refused to say whether the Clinton Foundation was 'tied into' the email investigation that the Obama administration wrapped up this week. The FBI has never publicly acknowledged that both Clintons are under investigation for abuse-of-power.

Associated Press / July 7, 2016 The FBI did not put Hillary Clinton under oath, or record what she said, when agents questioned her for 3-1/2 hours last Saturday, FBI director James Comey told Congress on Thursday. 'Well, that's a problem,' said Florida Rep. John Mica. 'It's 'still a crime to lie to us,' Comey assured him during more than four hours of testimony before the House Oversight and Government Reform Committee. Without a transcript of what Clinton said, it would be difficult to prove her words were false. 'The American people would like to see what Hillary Clinton said to the FBI,' Senate Majority Leader Mitch McConnell said Wednesday. A 2006 FBI memo states that except in rare circumstances, 'agents may not electronically record confessions or interviews, openly or surreptitiously'. The only record of Clinton's interview is likely to be a Form FD-302, an investigative analysis that summarizes what Clinton said. Comey said he has read the '302' from Saturday's interview, and acknowledged that he was not one of the roughly half-dozen agents present during Clinton's questioning. Mica said he wants the Oversight Committee's members to see a copy of the analysis.

In Russia, KamAZ is no. 1 and MAZ is second in heavy trucks. GAZ is doing well with light and medium trucks. In Ukraine, KrAZ sells a lot of vocational, specialty and military tactical trucks. The folks at KrAZ are good people with high levels of ethics, morals and values.

Are Mack axles are not available with the Hendrickson "Haulmaax" suspension? Did you ever consider trying a truck with Hendrickson's Primaax heavy-duty air suspension?

C'mon Bob, you must be pulling my leg. I can't believe you never heard of KrAZ. They're in the City of Kremenchuk, in central Ukraine. http://www.autokraz.com.ua/index.php/en/

Volvo Trucks Press Release / July 6, 2016 .

Scania Group Press Release / July 7, 2016 On August 23, Scania will start the launch of its next generation heavy truck by revealing the first units designed for the European long-haulage segment. This initial launch represents the public debut of the largest ever investment in new products and services by Scania, which at the same time is celebrating its 125th anniversary. Scania is introducing its new truck series in several phases, with a clear focus on different industries and customer segments, following a carefully planned schedule, where Scania’s current and highly regarded truck generation will be sold in parallel. The gradual introduction of the new generation will start with applications for trucks in the European long-haulage segment, and later be followed by additional truck variants. The common denominator is that Scania has developed a broad range of tailored products and service solutions, which help to reduce operating and maintenance costs, and also to boost vehicle uptime. Scania aims to become the leader in sustainable transport, where partnerships and digitalisation will play an increasingly important role. Sustainability is also one of the watchwords in the coming launch, as this will be crucial for the future competitiveness of Scania and its customers and also for their customers. “We are now in the final phase of preparing the sales and service network as well as the European production units. At the moment, we are not providing any further information about the many new innovations which are in store. But I am convinced that what Scania will unveil on August 23 will be talked about – both inside and outside the industry,” says Christian Levin, Executive Vice President Sales and Marketing. .

Fleet Owner / July 6, 2016 This year, fuel economy is a theme you’ll hear often. How truck manufacturers will comply with 2017 fuel efficiency requirements—it’s the tail end of Greenhouse Gas (GHG) Phase 1 rules before the impending GHG Phase 2 regs arrive—plays a big role in Fleet Owner’s New Models Preview. Heavy truck OEMs weren’t all ready to talk about their solutions as of press time, however, with Volvo Trucks North America and Mack Trucks the exceptions. But OEMs that decided to keep their 2017 GHG solutions under wraps for now hinted at big changes to come, especially where Navistar’s International Pro­Star tractor is concerned (new “LT” Series launch). Lots of other changes are in store, of course, across the 2017 new models. More than a few new models will be hitting the road for 2017, including new offerings from Navistar and Peterbilt. --------------------------------------------------------------------- Class 4-7 Ford F-750 Along with Ford’s super duty pickup lineup, the 2017 Super Duty chassis cabs, including F-450 and F-550 models, get a reboot with a new product launch. The chassis cabs arrive with a 7,500-lb. gross front axle weight rating—up 500 lbs. from previous models—designed to support bigger snowplows, utility buckets and other vocational upfit equipment. The F-450 and F-550 chassis cabs have a combined weight rating of up to 40,000 lbs., which the auto­maker notes is half the 80,000-lb. max combined weight for heavy trucks. The manufacturer also highlights the 2017 chassis cabs’ frame, which Ford says is 95% high-strength steel and has eight times more torsional rigidity than prior models. In addition, “many components are more robust in the new Super Duty, including axles, suspension, driveline, and towing hardware,” according to the OEM. For the first time with the Super Duty trucks, the bodies boast high-strength, military-grade aluminum throughout the cab, which Ford says helps allow for “significant increases in towing and payload capability.” The new models offer weight savings of up to 350 lbs. with the materials used. An optional second-gen Ford 6.7L Power Stroke V8 diesel brings the Super Duty chassis cabs up 30 hp. and 90 lbs.-ft. of torque to 330 hp./750 lbs.-ft., the most ever for the lineup. That same engine is offered with three power levels in the F-650 and F-750 medium-duty trucks: 270 hp./675 lbs.-ft., 300 hp./700 lbs.-ft. or 330 hp./725 lbs.-ft. Based on the 330-hp. configuration, Ford says the F-650 and F-750 models provide a B10 engine life of 500,000 mi., meaning 90% of them are expected to reach that point without requiring major engine service. According to the OEM, the 6.7L is 25% quieter at 60 mph and up to 45% quieter at idle inside the cabin. --------------------------------------------------------------------- Freightliner M2 The big news for Freightliner’s M2 medium-duty truck lineup is the introduction of proprietary Detroit DD5 and DD8 engines that will meet 2017 greenhouse gas emissions standards early. The engines will initially be built and shipped from the powertrain facility in Mannheim, Germany, owned by Daimler AG, Freightliner’s parent company. Production will eventually shift to Daimler’s Detroit engine assembly facility in Redford, MI, starting in 2018. The Detroit DD5 medium-duty engines, which are for sale in limited quantities, became available this year for the Freightliner M2 product line. Extensive availability is expected in 2018 across the entire Daimler Trucks North America (DTNA) product portfolio, including Freightliner, Western Star, Thomas Built Buses, and Freightliner Custom Chassis Corp. (FCCC) vehicles. Altogether, Daimler AG said it has invested some $375 million to enable the addition of DD5 and DD8 engines to its medium-duty lineup as well as to begin building them at Detroit’s Redford plant. “Detroit medium-duty engines will provide what no other manufacturer in North America can offer, and that is a total vehicle solution that matches Daimler’s global engineering prowess with the most complete lineup bar none in the industry,” DTNA president and CEO Martin Daum noted earlier this year. --------------------------------------------------------------------- Freightliner Custom Chassis Corp. MT Chassis Freightliner custom chassis corp. (FCCC) got a shot in the arm earlier this year when its parent company, Daimler Trucks North America (DTNA), invested $22.7 million to expand FCCC’s Gaffney, SC, facility and improve operations, which included the construction of a new logistics center as well as an expansion of the current office building, employee parking lot, completed chassis parking, and loading/delivery operations. The investment will drive implementation of a new line-side delivery process that will utilize nearly 60% more component kitting. “The investment shows our commitment to the employees in Gaffney, our customers, and to the future of FCCC,” said David Carson, who was FCCC’s president at the time of the announcement. “We will continue to build the best chassis with the best features and customer support, and this investment will ensure we are well-positioned for future growth.” In addition to the logistical and process improvements, the investment will provide an expansion to the current office building, which will provide a 25% increase in personal workstations, increase the training room capacity from 25 to 100, and double the amount of available team workspace. In March of this year, FCCC officially rolled out its Opti­View fully integrated, all-digital LCD instrument cluster. Designed in collaboration with Mercedes-Benz, OptiView features fully integrated gauges; an easy-to-read interface aimed at increasing driver safety and comfort; anti-glare display with bright graphics, clear fonts and streamlined menu structure; a 360-deg., high-resolution camera system; Bluetooth connectivity and Smart Wheel controls; and an intuitive touchscreen menu that displays information from a number of inputs and sources. FCCC vehicles will also be offered with the DD5 and DD8 medium-duty engines built by DTNA’s Detroit subsidiary by the end of this year. --------------------------------------------------------------------- Chevrolet 4500 General motors just announced a new wrinkle in its medium-duty production: In the first half of 2017, commercial cutaway models, including 4500 GMC Savana and Chevrolet Express vans, will be built by Navistar, which brings a dormant assembly line at Navistar’s Springfield, OH, plant back to life. The cutaways are often upfitted as ambulances, school buses, and utility vehicles, GM notes. In addition, GM and Navistar also announced plans to jointly produce a Class 4-5 conventional cab truck, “bringing medium-duty, conventional-cab trucks back into the portfolio,” according to GM. These trucks will combine Navistar chassis with GM commercial components and engines and are expected to go into production in 2018, also at the Springfield plant. Meanwhile, arriving this summer are the Chevrolet-badged Low Cab Forward 3500, 4500, 3500-5500HD, and 4500-5500XD models based on Isuzu’s N-Series cabover trucks. They offer gross vehicle weight ratings from 12,000-19,500 lbs., and all but the Chevy 3500HD and 5500XD regular cabs—the latter claiming highest available payload for the lineup just shy of 12,800 lbs.—come in regular or crew cab variants with seating for up to three or seven passengers, respectively. For motivation, the 3500 and 4500 trucks come with a 6.0L V8 gasoline engine producing 297 hp. and 372 lbs.-ft. of torque. The 3500HD regular cab gets a 3.0L 4-cyl. diesel that produces 150 hp. and 282 lbs.-ft. of torque as soon as 1,600 rpm, and all other models have Isuzu’s 5.2L 4-cyl. diesel that produces 215 hp. and 452 lbs.-ft of torque as soon as 1,850 rpm. The cabover design provides better visibility, easier entry/exit and tighter turning radius, according to the manufacturer, making them particularly suited for jobs like urban delivery routes. Overall length allows for “generous cargo space,” GM says, and various configurations. --------------------------------------------------------------------- Hino 195 In the biggest change for the 2017 products from Hino Trucks, all now come standard with telematics and connected vehicle systems. “Our major product enhancement for model-year 2017 is essentially a software enhancement. We introduced Insight, our connectivity solution, as standard for all models,” says Adrian Ratza, marketing manager at Hino Trucks. “This is groundbreaking in that it is a major step for us in transitioning what was once a truck solution to what is now a true transportation solution with the Hino product.” Hino Insight includes telematics—Telogis provides that system—as well as remote diagnostics and case management services. Standard Hino Insight comes with one year of telematics (buyers also have two- and four-year options), five years of remote diagnostics, and five years of case management. “Hino Insight has one objective: increase uptime and efficiency,” the OEM states. --------------------------------------------------------------------- Hino 338 In a walk-through of how the Insight platform works, Hino explains that the telematics portion of the software picks up diagnostic trouble codes, or DTCs, from a truck as they occur. Trouble codes are transmitted to Hino and the truck’s owner, and remote diagnostics—performed in real time by technicians and diagnostics software—determine what the problem is and the severity. The system can coordinate with the owner, dealer providing service, and Hino to set up necessary shop time and ensure needed repair parts are available. The newest of the Hino lineup, the 155 cabover three-passenger and 155 DC double cab, offer 14,500-lb. gross vehicle weight rating (GVWR) and are powered by Hino’s J05E 5L turbo diesel making 210 hp. and 440 lbs.-ft. of torque. The 195 and 195 DC models up max GVWR to 19,500 lbs. and carry the same powerplant, while the 238 gets a 6-cyl., 8L diesel with 230 hp. and 520 lbs.-ft. of torque. That engine is standard on the 258 and 268 models, but an 8L diesel with 260 hp. and 660 lbs.-ft. of torque is optional. The larger engine is standard on the top of the lineup, the 338. --------------------------------------------------------------------- International TerraStar The latest new-model news from Navistar International is the addition of the Cummins ISL engine and Eaton Procision dual-clutch automated manual transmission as options, notes Carl Webb, vice president and general manager of the medium-duty product line. “We will still offer the N9 engine and Allison fully automatic transmission for our medium-duty trucks. This just gives our customers more options,” he says. Other medium-duty options include factory installation of the Bendix Wingman Fusion collision mitigation system and the addition of air disc brakes as a published option across the board for this segment. Late last year, Navistar also finalized a long-term deal with General Motors to roll out a jointly built Class 4-5 medium-duty conventional cab truck powered by both gasoline and diesel engines by 2018. Those future medium-duty trucks will be developed by marrying Navistar chassis configurations and manufacturing capabilities with GM commercial components and engines, the companies indicated. Built with both Chevrolet and International nameplates, the new trucks are slated to start production in 2018 at Navistar’s plant in Springfield, OH. At the time, Navistar said that it planned to add 300 jobs and invest more than $12 million in facility upgrades to build these medium-duty models. --------------------------------------------------------------------- International DuraStar “From our standpoint, it will probably be more Class 5. It could be stake beds, box trucks, or vehicles for tree service,” Bill Kozek, president of truck and parts for Navistar, said at the time. “It will primarily be in the construction-type segment. On the Chevy side, it’s probably more Class 4 pickup models. It’s also an opportunity for both of us to participate in an area that neither of us have been [heavily] involved in [the last few years]. It allows GM to expand, primarily, its Chevrolet brand, and it allows Navistar to strengthen its International truck lineup.” The vehicles will also use “many GM components and engines” and, from a Navistar perspective, allow it to continue its “customer-centric approach” to “provide our customers with the best products available,” Kozek said, adding that this jointly built Navistar/GM truck will serve as a replacement for the Navistar International TerraStar model. --------------------------------------------------------------------- Isuzu FTR It won’t go into production until mid-2017, but the biggest news from Isuzu Commercial Truck of America is the FTR arriving as a 2018 model. The truck expands Isuzu’s offerings into the Class 6 segment and will be powered by the company’s 5.2L turbo diesel coupled to an Allison 2000 Series automatic transmission. Horsepower and torque figures are not yet finalized, but the engine has a B10 life of 310,000 mi.—as with all Isuzu’s diesel engines—so 90% of them are expected to reach that point without an overhaul. The FTR can be spec’d with either a 50- or 100-gal. fuel tank, giving it “incredible cruising distance” along with the 4-cyl. engine’s fuel economy. The company notes its expertise in that 4-cyl. niche and that it’s a first for the class. The FTR targets what Isuzu expects will be a growing need to deliver more goods in tight urban areas. The low-cab-forward design increases visibility and maneuverability, according to Isuzu, and a steer-wheel cut of 50 deg. will give the FTR a sharp turning radius. Eight wheelbase configurations will accommodate bodies from 16 to 30 ft. on the FTR, and the truck is designed as “the best Class 6 choice for pickup and delivery in cities,” says Shaun Skinner, president of Isuzu Commercial Truck of America. Isuzu’s 2017 NPR-HD, NPR-XD, NQR and NRR low-cab-forward trucks offer gross vehicle weight ratings of 14,500-19,500 lbs. and are powered by the 5.2L turbo diesel producing 215 hp. and 452 lbs.-ft. of torque. All ride on an Aisin 6-speed double overdrive transmission. The Reach van continues with a 3.0L turbo diesel producing 150 hp. and 282 lbs.-ft. of torque. All models include the Isuzu Diagnostic Service System, which allows an Isuzu dealer to provide the truck owner with a “health report” on vehicles. --------------------------------------------------------------------- Kenworth T370 New axle options are the name of the game for Kenworth Truck’s medium-duty lineup, with its T370 conventional model now available with Meritor non-drive front steer axles rated from 16,000 to 20,000 lbs. and Meritor 44,000- and 46,000-lb. heavy-duty tandem-drive rear axles. Kenworth said that Meritor MFS-20 front axles and Meritor MT-44 and RT-46 Series tandem drive rear axles for the T370 can be spec’d with the Paccar PX-9 engine rated up to 350 hp. and 1,150 lbs.-ft. of torque. “The expanded axle offering will now enable operators to leverage the T370 for a broader range of vocational applications that require 20,000-lb. front and 46,000-lb. rear suspensions, such as dump, fuel, utility, crane, service trucks, or mixers,” Jason Skoog, Kenworth’s assistant general manager for sales and marketing, noted earlier this year. “The Paccar PX-9 offers excellent power in a smaller footprint to move more weight. Coupled with the higher-capacity Meritor front axles, customers can have more of the payload’s weight shifted to the steer axle and still take advantage of the T370’s short bumper-to-back-of-cab measurement.” The MFS-20 front axles, which are available with 16,000-, 18,000-, and 20,000-lb. gross axle weight ratings, include a heavy-duty, cross-brace-reinforced front frame assembly; bolted cross members; and either 10 5/8 in. frame rails with insert or 10 3/4 in. frame rails. Full inserts are available for both of these rail sizes. Iron hubs, drum brakes, and dual-power steering gears, along with a power steering cooler, complete the lighter engine/higher-capacity front axle combination. According to Meritor, the MFS-20 features an optimized turning radius to provide sharper wheel cut and increased maneuverability. Along with the new Meritor axles, the T370 is now available with heavy-duty rear suspensions rated up to 46,000 lbs. from a variety of leading suppliers in either spring or air configurations. --------------------------------------------------------------------- Fuso Canter E-Cell You can’t order one yet, but Mitsubishi Fuso Truck of America (MFTA) is working on an all-electric model of its Canter truck, initially based on the Canter FE130. The company tested a number of the prototype trucks in various duty cycles in Lisbon, Portugal, and found that on a full charge, the powertrain offers a range of about 62 mi. hauling more than 4,400 lbs. Jecka Glasman, president and CEO of MFTA, says she believes making such trucks “is the future” for the company. The electric powertrain makes the truck ideal for delivery runs in dense urban areas, according to Chris Burdett, a product engineer at Mitsubishi working on the project. Burdett says the electric Canter has been tested and proven, and the goal for the manufacturer now is to find ways to reduce costs of the drivetrain. Coupled with lower maintenance and fewer parts used in the electric drivetrain, the goal is to be as break-even or competitive as possible in terms of cost of ownership compared with Mitsubishi Fuso’s diesel models. The electric engine produces the equivalent of 150 hp. and 479 lbs.-ft. of torque. --------------------------------------------------------------------- Fuso FE160 Across the rest of Mitsubishi Fuso’s lineup, the powerplant is the company’s 3.0L turbo diesel producing 161 hp. and 295 lbs.-ft. of torque as soon as 1,300 rpm. The FE130, FE160, FE160 crew cab, FE180, and four-wheel-drive FG4X4 also all have Mitsubishi Fuso’s Duonic 6-speed automated manual transmission. Gross vehicle weight ratings range from 13,200 lbs. on the FE130 to 17,995 lbs. for the FE180. The company’s FusoFirst support product announced late last year provides 24/7 towing, tire service, jump starts, lockout service, and fuel/DEF fluid replenishment within the trucks’ three-year warranty period as well as technician and driver training. A mobile troubleshooting app includes a “support wizard” with instructional content for drivers. --------------------------------------------------------------------- Peterbilt Model 348 Although there won’t be many changes to speak of to Peterbilt Motors’ medium-duty lineup in the coming year, the OEM plans to keep placing particular emphasis on its two compressed natural gas (CNG) medium-duty Model 337 and Model 348 options that were introduced back in mid-2015. Both vehicles are now in production and can be configured as trucks or tractors and are “an ideal choice” for dump, refuse and short- and regional-haul operations, the OEM said. According to Scott Newhouse, Peterbilt’s chief engineer, those two CNG-powered medium-duty models are optimized with a 110-in. bumper-to-back-of-cab (BBC) configuration for the addition of natural gas storage tanks. “The CNG Model 337 and 348 give Peterbilt the industry’s most competitive portfolio of natural gas vehicles,” Newhouse says. “The dimensions provide a BBC 2 in. shorter than any competitive model and a cab height that is 2 1/2 in. lower.” --------------------------------------------------------------------- Peterbilt Model 220 Newhouse says the optimized spec, including steering geometry that provides up to a 50 deg. turning angle, provides improved maneuverability in congested city and jobsite operations. Both models are powered by the Cummins Westport ISL-G with 320 hp. and 1,000 lbs.-ft. of torque. Peterbilt added that its [DAF LF-based] Class 5-7 conventional models continue to be built at the Paccar factory in Sainte-Thérèse, Quebec, a plant that opened in 1999 and has produced more than 100,000 vehicles. The Class 6-7 cabover Model 220 is manufactured at the Paccar assembly facility in Mexicali, Mexico. --------------------------------------------------------------------- Ram 5500 Chassis Cab For 2017, Ram trucks’ 4500 and 5500 chassis cab four-wheel-drive models get a left-side power take off (PTO) option in addition to right-side PTO capability. The feature is already available on two-wheel-drive trucks—both left and right PTO options are 60 hp.—and it allows the trucks to run two shaft-driven accessories. “That additional, left-side PTO capability on the 4x4 is very important for the work customer. The traction lets you get to a lot of otherwise difficult work sites and remote locations,” says Dave Sowers, director of marketing for Ram Trucks. “The option lets you drive multiple devices. So, for example, a mount-on-top, gas-powered generator and a tow-behind, gas-powered compressor could be left at home, and now you take one 4x4 chassis cab to the remote work site and get all your work done in one place.” Ram chassis cabs offer up to 29,600 lbs. towing in the 5500. Standard on the 4500 and 5500 chassis cabs is a 6.4L gasoline Hemi V8, and both offer an optional 6.7L Cummins turbo diesel. All the Ram chassis cabs have a rear frame with 50,000 psi of strength. That frame is also designed specifically to be friendly for upfit bodies and equipment, according to Sowers. “We have straight, flat, and clean frame rails as well as standard width and standard cab-to-axle measurements. We also pass our fuel fill through the frame so it doesn’t require relocation, and we keep our urea fill tube on diesel models out of the way of the upfit zone,” he says. Chassis cabs also feature a vehicle system integration module, or VSIM, designed to allow upfitters to tie in to the electrical system “in a seamless way without splicing,” which Ram claims as a class exclusive. A dual, 440-amp alternator setup comes standard with the 6.7L Cummins engine. --------------------------------------------------------------------- Workhorse E-Gen There’s been something of a stir at Workhorse Group this year, as the company has been working on one of perhaps two or three Federal Aviation Administration exceptions granted to test commercial drone use in the United States. The company’s octocopter HorseFly drone can be sent by a delivery driver to drop off packages up to 10 lbs. up to 2 mi. away, and Workhorse CEO Steve Burns says the OEM is now exploring a test of the system by a delivery service provider. Workhorse hopes to make breakthroughs in drone delivery and be able to offer the feature to its customers, which include a number of package-delivery companies. For 2017 models, a smaller 2-cyl. 647cc engine—part of automaker BMW’s i3 range extender, or REx, system—will now provide battery-replenishing generator power that helps eliminate “range anxiety” in the Workhorse E-GEN medium-duty van chassis. The chassis offers a choice of wheelbases and gross vehicle weight ratings from 16,000 to 19,500 lbs. Burns says the new BMW system is designed for hybrid powertrain use and delivers the same recharging capability as the former 4-cyl. 2.4L Power Solutions International engine in about one-quarter the displacement, so Workhorse anticipates further fuel economy gains. The electric powerplant is a 200 kW unit by Sumo, and the system uses Panasonic battery packs. Burns says choosing readily available components like the Panasonic batteries and BMW range extender system is part of Workhorse’s strategy as a “young manufacturer”—the idea is that replacement parts are easy to find. The lithium ion batteries used in the Workhorse chassis also will see some improvement this year, offering a slight gain to the E-GEN’s approximately 65-mi. range on electric power. With the generator system and regenerative braking, which Burns notes eliminates much of the need to use the regular brake system, the E-GEN can double its range. --------------------------------------------------------------------- Class 8 Autocar ACX Some of the biggest changes you’ll see in the next model year from the OEM will affect its ACX Class 8 severe- duty truck model (built for refuse, concrete, water blasters, and other specialty applications), says Marc de Smidt, director of engineering at Autocar. The addition of the Cummins ISL engine and changes to back-of-cab models with a new single-package aftertreatment system that offers “a little bit of extra frame rail space” to help with body installation are among those. RP170 connectors will be standard on 2017 ACX models, he adds, along with a variety of “small improvements” being made to the cab to improve driver comfort in terms of noise reduction and ride quality. Also for 2017, onboard weighing and tire pressure monitoring systems can be factory-installed and thus fully integrated more seamlessly into the vehicle. Autocar’s ACMD Class 7 “Baby 8 “medium/heavy-duty chassis (used in street sweeping and refuse applications) will also feature a single module aftertreatment package that will offer 3 in. of frame rail space savings, a completely new electrical system, a variety of factory-installed options such as dual and right-hand only drive, plus door modification to make cab entry/egress safer. Finally, the OEM’s ACTT terminal tractor—offered in DOT and off-road configurations with both diesel and compressed natural gas (CNG) engine options—gets improved electrical controls and a new HVAC system. And a patent-pending quick release fifth wheel assembly will reduce the time it takes to connect and disconnect from freight trailers, resulting in more uptime and productivity in yard operations. --------------------------------------------------------------------- Freightliner Cascadia Big changes to freightliner trucks’ signature highway tractor, the Cascadia, are on the way for the 2017 model year as the OEM prepares to comply with new greenhouse gas (GHG) emissions rules, but the company says it is keeping those changes under wraps a little while longer. Meanwhile, Freightliner is offering a few tweaks to its vocational models, expanding its all-wheel drive offerings and boasting ratings for the 108SD and 114SD. The Freightliner 122SD vocational tractor is also now available with a 23,000-lb. Detroit-branded front axle, the OEM says. Those changes build on vocational model upgrades rolled out late last year, which included two transmission options for its 122SD unit. The 122SD can now be spec’d with Allison 4700 Rugged Duty Series and Oil Field Services automatic transmissions. Both of those transmission configurations feature a second reverse or “deep reverse” gear in addition to the standard reverse; automatic shifts, which automatically and smoothly make the right shift at the right time; and improved startablity, which uses less torque to launch and go, the company adds. --------------------------------------------------------------------- Freightliner 114SD The OEM notes 122SD models spec’d with either Allison transmission are available with Detroit DD13, DD15, DD16, and Cummins ISX heavy-duty engines. Detroit Connect has introduced new features for its Virtual Technician remote diagnostics system to further improve integration and communications. A new portal provides users additional information about overall fleet health as well as enabling them to take a deeper dive into specific fault events. This portal is available on all Freightliners spec’d with the OEM’s proprietary line of Detroit engines. It will allow users to view and archive Detroit Diesel Engine Control reports, which use diagnostics to further analyze driver and vehicle performance. Detroit Connect has been pilot testing this new portal with select customers and anticipates it will be available to all customers this year. In addition to the portal, Freightliner’s parent company, Daimler Trucks North America, is developing a new telematics platform that will be available on select truck models in 2017. The OEM says that platform will have new connected vehicle communications hardware, will be available on a global basis, will enable integration with third-party applications, and will reduce the need for additional hardware. Freightliner adds that this telematics platform, which will rely on cellular connectivity, will mark the introduction of over-the-air capabilities, including remote vehicle parameter settings, remote downloading of DDEC reports, and remote flashing of firmware for electronic controllers. --------------------------------------------------------------------- International HX A new vocational line joined the International family of trucks this year, with more changes ahead for the 2017 model year as the OEM plans to overhaul its ProStar and LoneStar highway tractors to match changes being made to the Cummins engine family to comply with GHG rules. “We’ll be systematically upgrading our platforms, taking out weight, and setting the table for further improvements,” notes Steve Gilligan, Navistar’s vice president of product marketing. “We’re working closely with Cummins, and we’ll be phasing out our 2016 engines, moving to a single aftertreatment solution, and making other changes in the November-January timeframe.” The new over-the-air (OTA) programming option for Cummins engines rolled out earlier this year is one step in that process, Gilligan adds. OTA programming, available through the nine-pin International LINK device, enables drivers or fleet managers to use a mobile interface to update engine control modules at customer locations via a safe and secure wireless network without the necessity of visiting a dealer or other OEM service facility. This OTA service will first be available later this fall for limited production release on Cummins 2017 model-year engines, with plans to expand the service to additional model years. In terms of trucks, the International HX Series line of Class 8 vocational trucks is replacing the PayStar model and represents the first all-new vehicle introduced by the International Truck division of Navistar since 2010. Four HX Series models are available with both set-forward and set-back front axles in either short or long hood depending on the application. The HX515 is a 115-in. bumper to back of cab (BBC), set-forward axle straight truck for vocations that include concrete mixer, construction dump, refuse/roll-off, and crane. The HX615 is a 115-in. BBC set-back axle truck or tractor for vocations that include construction dump, concrete mixer, platform stake/crane, and refuse/roll-off. The HX620 is a 120-in. BBC set-forward axle truck or tractor for vocations that include heavy haul tractor, construction dump and platform stake/crane. And the HX520 is a 120-in. BBC set-forward axle truck or tractor for vocations that include heavy haul tractor, construction dump, and platform stake/crane. The HX515 and the HX615 models are powered by Navistar N13 engines, while the HX520 and HX620 models offer the Cummins ISX15 engine, Navistar said. --------------------------------------------------------------------- Kenworth T680 Like several of its competitors, Kenworth Truck is keeping most of its 2017 GHG upgrades close to the vest for now. Yet the OEM released a batch of new enhancements to its highway and vocational products this year that will carry on through its 2017 new model overhauls. Kenworth’s vocational flagship model, the T880, can now be equipped with the Hendrickson Ultimaax severe-duty rubber suspension. That suspension is available with axle ratings from 46,000 to 52,000 lbs. and axle spacings of 54 and 60 in. with 11-in. ride height for applications such as refuse, sand and gravel, crane/boom, platform, construction, and logging. The OEM began production of a 40-in. sleeper berth configuration this year for its T880 and T680 models aimed particularly at regional bulk haulers, open-deck and flatbed operators, as well as vocational fleets that use straight trucks such as petroleum fleets. Compared to Kenworth’s 38-in. AeroCab sleeper, the 40-in. unit offers an extra 22 cu. ft. of storage space and a 6 in. lower roof. Kenworth is also adding Allison Transmission’s TC10 fully auto­matic gearbox as an option for its T680 and T880 tractors. The OEM’s TruckTech+ remote diagnostics package is now standard on its Class 8 models equipped with the Paccar MX-11 engine. A complimentary two-year subscription to TruckTech+ is available as long as the truck is covered by the OEM’s two-year standard warranty, with a complimentary subscription for customers purchasing extended engine warranties through Kenworth. After the warranty period, Kenworth’s remote diagnostics tool can be maintained by subscription. --------------------------------------------------------------------- Kenworth T880 The OEM is also making its Kenworth Aero Advantage Fairing available as a factory-installed option for its T680 Advantage highway model when equipped with a 76-in. or mid-roof sleeper compartment and is expanding its auto start/stop engine monitoring system to prevent fuel gelling. Initially introduced as an option on T680 sleeper models, auto start/stop is also now available on T880 sleeper units as well as T680 and T880 day cab models. The option may be ordered with or without the Kenworth Idle Management System, a battery-based auxiliary power unit package. Finally, Kenworth is offering a new clear back-of-cab diesel emissions fluid (DEF) tank configuration option for its T880 and T680 that is designed to maximize fuel capacity by removing the DEF tank from the frame rail and mounting it above the fuel tank and under the cab. This setup also features a lightweight 7.3-gal. DEF tank, which shaves about 25 lbs. off the weight of a standard-mount DEF tank. It also clears the way to install larger fuel tanks, giving the truck a longer range, the OEM says. --------------------------------------------------------------------- Mack Pinnacle The big news for mack trucks is what will be changing under the hood of its highway and vocational units for 2017.There will be overhauls to the OEM’s proprietary MP Series engine lineup and vocational-themed enhancements to its mDrive automated manual transmission (Volvo I-Shift). Mack’s 11L MP7 and 13L MP8 [Volvo D11 and D13] engines received a number of advancements for 2017 that are designed to simplify maintenance and improve efficiency and productivity. Both engines feature an updated wave piston design that Mack says raises the compression ratio and enables more complete combustion of fuel, while a common-rail fuel system more precisely injects fuel. Combined with a two-speed coolant pump, these features help increase MP7 fuel efficiency by up to 5.1% and MP8 fuel efficiency by up to 5%. Additional improvements to both engines include a new two-piece valve cover, shimless rockers, and a low-pressure fuel system with an enhanced, integrated aftertreatment dosing module to reduce maintenance needs. An updated double-walled exhaust gas recirculation (EGR) flow sensor helps reduce condensation and soot buildup in cold weather, while a new intake throttle enables a faster warmup when the engine is started. --------------------------------------------------------------------- Mack Granite For the OEM’s Super Econodyne downspeeding highway tractor package, Mack will offer a 2017 MP8 engine equipped with a turbo compounding system that converts waste energy from the exhaust into mechanical energy that is fed back to the engine. The system adds up to 50 additional horsepower, enabling a substantial fuel efficiency increase of up to 8.8% compared to the previous MP8 model. The OEM’s enhanced Mack mDrive HD 13- and 14-speed AMT variants (Volvo I-Shift with crawler gears) feature up to two additional low-ratio creeper gears to provide improved startability for heavy loads while maintaining proper gearing for fuel efficiency at speed. Mack adds that the mDrive HD 14-speed, available only in overdrive configuration, adds a second ultra-low-speed reduction gear designed for curb pouring applications or low speed, heavy-haul maneuvering. Both transmissions offer up to four reverse gear ratios. The mDrive 13-speed will become the standard gearbox on Mack’s Granite vocational model. The mDrive HD will be available on Granite models with a 2017 MP8 engine and on the OEM’s Titan vocational tractor and Pinnacle highway models. Further extending the fuel efficiency improvements associated with the AMT, the OEM is rolling out Mack Predictive Cruise (Volvo I-See), an intelligent system that memorizes a route when cruise control is on, storing up to 4,500 hills in its memory. Mack Predictive Cruise constantly monitors speed, engine load, weight, and road gradient to help it select the best gear for the road ahead, and it can increase fuel efficiency by up to 1%, the OEM notes. --------------------------------------------------------------------- Peterbilt Model 567 The big news for peterbilt motors (aside from its 2017 GHG updates, which the OEM is keeping quiet about for now) is the addition of a new vocational chassis, the Model 520, aimed at refuse operations. The Model 520’s dual-station cab, which comes with the OEM’s ProBilt interior package, offers two nearly identical work environments so drivers can seamlessly operate from the left- or right-hand side. This includes dual controls for the parking brakes, heating ventilation and air condition system, and stereo. Peterbilt said the console sides of the Model 520 are angled to give operators easy visibility and access to the same controls and displays from the right and left. The truck comes standard with a Paccar MX-11 diesel engine but can be spec’d with optional 9L or 12L natural gas engines. The Model 520 offers 27% more windshield viewing area than previous designs and two headlight options: single halogen bulb lamps (standard) or light emitting diode headlamps. --------------------------------------------------------------------- Peterbilt Model 520 Peterbilt is now offering Allison Transmission’s TC10 fully automatic gearbox with its Model 567 and 579 highway tractors mated to either Paccar or Cummins engines. Offered with ten forward speeds and two reverse, the TC10 uses a patented torque converter and twin counter shaft design and is covered by a five-year or 750,000 mi. warranty, the OEM says. The OEM also just rolled out a new paint formulation. The Axalta coatings used on its heavy-duty truck cabs and sleepers enhance color qualities and durability. Additionally, the company says its new base and clear coatings offer better color characteristics for greater gloss, reflectivity and luster. Finally, new chassis routings for the Model 579 and 567 units, which run the length of the truck, now organize air, electrical and fuel lines into individual bundles for faster identification and servicing. The routings are secured with newly designed frame brackets that hold each bundle separately and provide even greater durability, the company notes. --------------------------------------------------------------------- Volvo VHD The big news for volvo trucks north america (vtna) is retooled engines and powertrain enhancements aimed at 2017 GHG compliance while delivering for performance and fuel economy improvements. Wade Long, director of product marketing at VTNA, notes that the OEM’s retooled D11 engine features a 2.2% fuel efficiency improvement versus the 2014 model along with several enhancements. These include a new two-piece valve cover; new common-rail fuel system that helps boost fuel savings while quieting the engine; new wave pistons that improve fuel/oxygen mix for cleaner burning; an assembled camshaft that reduces weight by 27 lbs.; shimless rockers; and a power boost to 425 hp. VTNA says production on the new D11 will start in January 2017. The OEM’s revamped 2017 D13 engine offers a 2.5% fuel efficiency gain versus its 2014 predecessor. It uses the same new common-rail fuel system, wave pistons, and assembled camshaft as found in the 2017 model D11, along with a new two-speed coolant pump on XE models that boosts fuel economy by 0.5%. VTNA is also offering 100 lbs.-ft. of extra torque for the 455-hp. version of this engine, increasing overall torque to 1,850 lbs.-ft. Production on the D13 will begin in October. In mid-2017, the OEM plans to roll out a D13 engine featuring turbo compounding, which adds another 50 hp. via waste heat recovery, offering a further 3% fuel economy boost versus the standard 2017 D13 model. Long notes that no major changes are being made to the 2017 D16 model compared to the 2014 iteration. A new one-box exhaust aftertreatment system will be standard on the D11 and D13, while the D16 keeps the two-box system. Also, VTNA is introducing “crawler gears” for its proprietary I-Shift automated manual transmission (AMT) for vocational and heavy haul applications up to 220,000 lbs. GCW or more with application approval. Available as an overdrive in Volvo VHD, VNX, VNM and VNL models, the I-Shift with crawler gears can be spec’d with Volvo D11, D13 and D16 engines. A new I-See option will work in tandem with the I-Shift AMT to “learn” roadway topography, with the gearbox memorizing and storing it for use the next time a particular route is traveled. Long noted that up to 4,500 different routes can be stored as part of this new function. --------------------------------------------------------------------- Western Star XD A variety of vocational enhancements represent the big news from Western Star Trucks at this point, with the latest offering being a 23,000-lb. Detroit-branded front steer axle offered in the set-forward and set-back configurations of the Model 4700. This 23,000-lb. front steer axle will soon be available in Western Star 4800 and 4900 models as well, the OEM notes. Western Star also recently rolled out its Extreme Duty (XD) Offroad package and the MBT-40 Transformer chassis for both the articulated and ridged frame markets. Engineered specifically for extremely rugged environments, it’s now available on both the 4900 and 6900 models. There are plans to make the XD Offroad package available on other models in the future. --------------------------------------------------------------------- Western Star 5700 Starting this fall, Western Star will begin offering the Eaton UltraShift Plus automated manual transmission (AMT) in the 5700XE with new ratings that allow for power take-off and higher gross combination weights. The rollout will begin in October with the UltraShift MHP and MXP targeting chip trailer applications and vehicles with high GCVWR. The Eaton Advantage 10-speed AMT will be available for the 5700XE in March 2017 with multiple PTO locations available. Western Star 4900 and 6900 truck models can now be spec’d with the 4700 Off Road Series (ORS) fully automatic gearbox. The 4800 ORS is only available on the 6900 model. Allison’s ORS transmissions come with two-year warranties and are available with Detroit DD15, DD16, Series 60 Tier III, and Cummins ISX engines. The OEM has also unveiled a Fabco FAT-30 auxiliary transmission for the 6900XD. It is a stationary shift three-speed and is ideal for extra heavy-duty on- and off-road jobs, able to handle 30,000 ft.-lbs. of input torque.

BBC / July 7, 2016 Sir Jeremy Greenstock, UK ambassador to the UN in 2003, said Mr Blair had wanted a UN resolution backing action. But he told the BBC senior US officials thought it was a "waste of time". Sir Jeremy said he felt Mr Blair had wanted to wait longer before taking military action. It would have been "much safer" to give weapons inspectors in Iraq another six months to continue their work, he added. "I felt that at the time, the British felt it at the time, I think the prime minister felt it at the time, that the Americans pushed us into going into military action too early," he told the BBC. Mr Blair had wanted to secure a UN resolution before the conflict but US officials were not committed to a resolution, he added. "The Americans weren't genuine about it - but the prime minister was genuine about it - because he thought there was a chance that Saddam could be made to back down before we had to use military force. "And George Bush for a while agreed with him. But other people behind George Bush didn't agree with him and thought it was a waste of time." General Tim Cross - the most senior British officer involved in planning the war - said former US defence secretary, Donald Rumsfeld, would not listen either to the UN or the UK about the aftermath of the invasion. He said the US dismantled the Iraqi army and the ruling Ba'ath party without consultation.

Fleet Owner / July 6, 2016 Kenworth has announced the availability of the 7-speed Allison 4700 Rugged Duty Series automatic transmission with the 116.5-in. BBC Kenworth T880 short hood. The Allison 4700 RDS is available with the Paccar’s DAF MX-13 engine as well as the DAF MX-11, which provides a 400-lb. weight savings over 13-liter engines. According to the company, the transmission improves drivability, allowing truck operators to creep slowly and perform other low-speed maneuvers. “This level of control makes the Allison 4700 RDS ideal for ready-mix applications where drivers require a truck with maximum speed control for job site maneuverability in steep and difficult terrain, or with mixer trucks that move slowly while pouring concrete for street curbs, driveways or other projects in confined spaces,” the company added. “With the Allison 4700 RDS, customers can spec a highly maneuverable mixer of any type and benefit from greater precision of concrete delivery with no shifting required, enabling ready-mix drivers to focus on the road ahead and the jobsite around them,” said Kurt Swihart, Kenworth marketing director. “By coupling the Allison 4700 RDS with the MX-11 and the T880 short hood, truck operators get a truck with a lighter gross combination weight and an additional 6 inches of body space on the chassis for more payload. It’s a great choice for other customers who need trucks with increased overall transmission ratios, such as those equipped with dump and refuse bodies as well as cranes.” A lower first gear ratio and an optional second ‘deep reverse’ make the truck even more maneuverable particularly on steep grades and in tight settings, according to Kenworth. The transmission also features no-power interrupts, providing full power shifts and allowing full use of the engine’s horsepower, the company added. “Spec’ing an automatic transmission for tough vocational applications can also help make a Kenworth truck even more driver friendly and comfortable to operate. The Allison 4700 RDS is an important option to consider for retaining and recruiting drivers,” said Swihart. Press Release - http://www.kenworth.com/news/news-releases/2016/july/allison-4700-rds/ .

Heavy, medium truck orders slide to four-year low Commercial Carrier Journal (CCJ) / July 6, 2016 Class 8 truck orders dropped to 13,100 units last month, while Class 5-7 orders totaled just 15,200 units. The last time heavy truck order levels hit marks this low, the country was shedding the effects of an economic recession. The pace of commercial vehicle orders slowed in seasonal fashion into the first month of summer say analysts. June’s medium- and heavy-duty net order total volume was the lowest monthly order total since July 2012. Seasonally adjusted, at 31,500 units, it was the lowest total since September 2012. FTR’s preliminary Class 8 net orders for June – the worst June since 2009 – show intake 8 percent below May and down 34 percent year-over-year. The annualized rate of orders continues to drop – 162,000 now for past three months, 185,000 for the past six months and 224,000 over the past 12 months. “The Class 8 market is stuck in a holding pattern, at the bottom end of this cycle,” says Don Ake, FTR’s vice president of commercial vehicles. “Fleets are cautious as freight demand has cooled off this year. There are enough trucks to handle freight right now with carriers are in a wait-and-see mode, before adding trucks or replacing older units.” Ake anticipates higher orders later this year, however, the volume of orders will likely be determined by the strength of the economy and freight activity at that time. “This is what the summer looks like in a market down cycle, so we can expect this level of activity for a couple more months,” he says. .