Back In Black Pulling

Do you think you get different reading setting timing with throttle in idle opposed to wide open? i'll have to try it have to put pump on motor for other truck this week.

Never heard of retard notch. mine usually starts right up except when its cold out.

Yea I got old hood come and get it?

Just curious how much it changes when you rev it up

What I have to do is take out the delivery valve and do the static timing to get a baseline. I know how to do that and until now was the only way I set timing. Just bought a Kent-Moore J-33300 timing tool (clamp on) on Ebay for $200, about as cheap as I have found. I will then see how far off it reads and just adjust the timing difference in going forward. That way I can adjust timing without the mess of pulling pump valve apart every time. Thanks Guys for the help.

Have to let us know difference between flow timed and what it is when running and how much that changes with higher RPMs

I usually take needle valve out of #1 and use hand primer. Been doing mine that way for years didn't know you can do it on inline.

Old timer that showed me how to do it all ways did it that way once in will he would check with timing light and it was real close.

Can find them on interweb new for $400

I want to get one but i'm waiting tell i need it

Merry Christmas

One from 2090 should work on 2100 same main body unless your mounting on the back then IDK

got a couple new and used

A couple miles south of Schaefferstown you would have past my place

94 18speed 18 ft aluminum box 4.73 rears hendrickson sup 27500 O.B.O.

http://www.truckntrailer.com/ebook/12-11-15/#58

Thats what i thought havent worked on one of thous yet.

Think you need a timing light to find #1 port closing . There is a plug some where on pump where there is a little hump on cam to indicate port closing.

Inline or v pump ?

Have to take a ride down to see it. Wonder if that means they parked my truck outside,,,,,,lol

Not sure which one is yours?

Mine have to right click send to documents then when you click upload pics you can find it.

or these?

http://www.bigmacktrucks.com/index.php?/topic/42410-photo-request-need-a-couple-photos-of-old-trucks-working/#entry309211

Was told that is all original.They also have short film of Evil receiving the truck New in Cali

Get well Soon

Not to hijack the thread (although its related). My Super with E9 has an engine brake.... are they controlled through the governor housing only? Or did they also come with a switch on the clutch pedal?

Yes switch on clutch pedal

Sharp

no expert but i think it is 6 speed it says to only use low in in first gear

Nope. We're looking for a used aluminum 10' dump body for it. Besides, it's a lot easier to clean and work on if the body's off.

Just saw one to day down the road from me at Martins Paving