mackmb212

I email asking about that truck a few months ago but the problem is getting it from the west cost to the east cost. Thanks for the post

Rudy

Thanks too you guys for your impute.

Hi guys would anyone know where to find new wind shield gaskets for a MB Mack. Thanks Rudy

If the 673 has the older crank, the one with the hollow rod journal's I would not! My dad turboed a couple back in the 60's and thay all broke the cranks, but when we changed them over to the newer style we had no more prob. also do not put to much fuel to them unless you have a block that you could put the piston oil cooler's in. Other then that I do not see a prob. just make a nice 205hp out of it, I'm going to turbo my Super 250 Cummin's and make it a 290, also puttin a Pyro in won't hurt good luck!!

BULLHUSK

I am going to look at a 78 MB this weekend and the only thing that is wrong with it is its non turbo I'm assuming there's a 475 or 673 under the cab I drive a MB that has a turbo and it can get out of its own way a non turbo truck has to be really bad. Thanks for your imput Rudy

Hi. Could a turbo be put on a end475 or end673 that dident come with one from factory,if its do able

What is the availability on parts like the Manifold and piping and turbo. Thanks for any imput

Rudy

There is an mb on the for sale board at Macungie. I hope you'll be there today and bring your company's mb. The truck is in Vermont.

Mike

I just got back from the show I must have missed it

Is there a lot of people selling parts there.

Rudy

Somebody in here had an ex-Overnite MB607 tractor for sale awhile back.There is one for sale at Erickson's in Jackson,MN with a utility body on it.It's listed as a B67 on the Truckpaper site.

I seen that one it looks like the cab is beat up quite a bit and they asking 8500 or somthing like that

I found a MB 600 box truck in grate looking shape in California but getting it here to pa

Would cost more then the truck is

I think they're cool as can be,much better looking than MR's!

yeah much better then the MR. I get to drive a MB often the pumper in

My profile pic is still in service its a fun truck to drive being 5 speed and all.

Eubank trucks in Richmond, VA has one sitting out front.

is it for sale

I came across one 3 years ago for 2500 bux I regret not buying it they only used

It to move voting machines from time to time. Thanks for your imput

Rudy

Hi everyone I have been looking to buy a MB for the last few years but I never see them for sale am I looking

In the wrong places. I would like a stake body or a small dump body MB if anyone knows where there is one

Sale let me know and also why you can find all different model macks but those.

Thanks Rudy

Thanks

I am also looking for a flip style rad cap for my b81 not having much luck.

Rudy

Looks decent.

These where pulled off a b61 I'm stripping,they all look straight if interested make me a offer thanks

Rudy

I have one from a 65 b61 if it would work for you.

What model Mack do you have.

I will take a look and get back too you tonight

Hey guys I need some thoughts on a trick I bought to strip. It has a non turbo 711 the truck I'm.restoring has a turbo 711 it the non turbo engine worth keeping around.

The truck also has a triplex and its tandem axle the cab is wasted and the frame as well. I bought the truck for interior parts and other odds and ends. The hood, fender filler panles ,grill loovers are good and ate for sale I can't use them because my other truck is a b81.

Rudy

Hey guys I need some thoughts on a trick I bought to strip. It has a non turbo 711 the truck I'm restoring has a turbo 711 is the non turbo engine worth keeping around.

The truck also has a triplex and its tandem axle the cab is wasted and the frame as well. I bought the truck for interior parts and other odds and ends. The hood, fender filler panles ,grill loovers are good and ate for sale I can't use them because my other truck is a b81.

Rudy

We have a mb in our dept,it is still being used as a front line pice. She's a 78 with a hamerly body has 40,000 miles and has seen a large amount of fire but still don't match the quality of a cf but I think the mb was and still is a grate truck and I would prefer it over anything modern.

Rudy

I have a small oil line coming out of the driver side block where the rest of the lines come out to the luberfiner, it dosent look like theres another port on the luberfiner for this line .

There is another unknown line coming from the coolent manifold. The top pic is coolent I'm guessing my finger is on it. The bottom pic I'm holding the line that gos to nowhere it has quit a lot of oil come out when I start the truck.

Rudy

I am in need of a passenger side inner fender and both top pices that bolt to the fender it self that run under the hood. I would try to make new ones but mine are both missing so I'm not sure what they look like.

Rudy

I got it straightend out i shoud of looked on the starter it says 12v and where that parallel switch is supposed to be there is a ford looking stater silonied