880joe

Can an 01 CCRS engine be put in where a pre CCRS 99 engine came out of or will there be programming issues with it

I would assume all electronic e7 would have cruise control

I have a 93 MH with vmac 1 it has cruise control

It will probably work if you also use the upright pieces that goes on the back of sleeper along with the top piece

The fairings on the Pinnacle flair outward where yours are straight I believe so I don't think they will line up

Yes you would have they are about 500 each but they do work great also

The LED lights that are in the new CHs will fit right in the old CHs but you do have to change the plug in.

I have a set for sale, but shipping them may cost more than they are worth. I have attached a couple pictures. Just let me know if your interested, thanks.

Thanks for the reply

Could a 2006 AC 427 be switched to a 2002 CCRS 427 by switching the front cover,intake and exuast manifold and turbo. If not what else is different?

My 99 CH is about the middle of rear head on left side on the intake manifold

I think I just gave about 150 for some Atro torque rods for my 99 CH with air ride

Are you needing a copy of the 1 on the firewall with the fuses in it or the 1 inside the cab that has all the breakers

There's 6 individual unit pumps on the right hand side of engine

I have a 93 MH with an E7 V-Mack engine

Oil pan is turned half around and sump tube switched around on axle forward but do know a guy that moved his axle without changing pan and never had any issues but he also didn't keep the truck to long afterwards so I don't know long term effects

Yes I did have organ donars and a fair sized project

Bottom end should be the same I believe the only difference in the two are in the fuel system

You will need front bumper bracket that will bolt on top of front spring hangers once you move it forward,shock towers are different mudflap hangers and brackets that goes behind front wheels,two small L shaped pieces that goes on bottom of cab that holds small rubber flap,there will also be a bracket that bolts on where front cab mount and lower front cab corner is different and of course a bumper and hood.

Do you ever miss the older truck you had before this one?

Probably not impossible but would be alot more work to make it look correct

You can get them new from Mack or at least you could a couple of years ago

Never mind I see he asked about CT not CL

Isn't the center section where turbo bolts on slanted on the CL's if so you will need a different part number