marsh123 Posted February 28, 2009 Share Posted February 28, 2009 ihave aproblem in mack truck model cx 613 V-MAC III system (no power)at first it give fault code 8---2 blink code so ichanged injector no 2after that no fault is comming but there is no power Quote Link to comment Share on other sites More sharing options...
Underdog Posted March 1, 2009 Share Posted March 1, 2009 Did you change just the nozzle? Or the electronic unit? If the ECU has been changed, then you need to have the dealer flash the engine computer to "learn" the new injector. Quote Link to comment Share on other sites More sharing options...
marsh123 Posted March 1, 2009 Author Share Posted March 1, 2009 Did you change just the nozzle? Or the electronic unit? If the ECU has been changed, then you need to have the dealer flash the engine computer to "learn" the new injector. I changed the electronic unit no 2 but it worked 1 day with full power and after that there lack of power Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted March 1, 2009 Share Posted March 1, 2009 Do you have a ETEC engine? or a Vmac? Quote glenn akers Link to comment Share on other sites More sharing options...
Underdog Posted March 2, 2009 Share Posted March 2, 2009 Do you have a ETEC engine? or a Vmac?All the CX's would be E-TECH engines Quote Link to comment Share on other sites More sharing options...
fjh Posted March 9, 2009 Share Posted March 9, 2009 I would like a little more info!What year is the truck! Is the exhast temp down or up!You may have a failing fuel transfer pump. or bad drain back valve low exhast temp!How many times was the code logged for the failed eup.The other thing is if you changed the pump your self you need to have the eup cal code installed in the ecu for perfect injection control. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.