sask3500 Posted December 20, 2022 Share Posted December 20, 2022 2016 mp8, needs new injectors. What's the success rate changing injectors only on a stainless cup motor? I have a guess, just thought I'd ask anyway. Tools in the aftermarket seem all unavailable, out of stock. On the off chance the dealer has tools does anyone have the part numbers for the puller, swedging tool and sealants? Local dealer is useless unless you call with numbers. Otherwise they take days to call back and half the time it's wrong. Quote Link to comment Share on other sites More sharing options...
Onyx610 Posted December 20, 2022 Share Posted December 20, 2022 Remover (88800387)/(88800460) Installer (88800457) Sealer (1161059) These are Volvo part numbers so take that for what it’s worth. 1 Quote Link to comment Share on other sites More sharing options...
Onyx610 Posted December 20, 2022 Share Posted December 20, 2022 They also may have changed but should cross reference. Quote Link to comment Share on other sites More sharing options...
sask3500 Posted December 20, 2022 Author Share Posted December 20, 2022 Thanks, hopefully that's a workable cross reference for a Mack dealer. Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted December 20, 2022 Share Posted December 20, 2022 Try .... Tillmantools.com and Monacotools.com and Freedomracing.com... I buy E-7/ E-Tech tools from them.. jojo Quote Link to comment Share on other sites More sharing options...
Onyx610 Posted December 20, 2022 Share Posted December 20, 2022 Those numbers are the same at the Mack dealer. Just saying Volvo changes shit all the time. Your more then likely gonna have to go aftermarket from one of the places Joey mentioned. 1 Quote Link to comment Share on other sites More sharing options...
Todd71106 Posted December 20, 2022 Share Posted December 20, 2022 I’ve actually researched this quite a bit lately. I have learned that the $300 kits you see on Amazon and eBay are single use kits at best. They may or may not hold up long enough to finish the job. I was considering doing the job myself because my buddy had a brand new kit he got off of Amazon. I heard a few stories about the tools failing halfway through the job. In the end, I took it to a shop due to the cost of the real deal tools, and my timeframe constraints. Quote Link to comment Share on other sites More sharing options...
sask3500 Posted December 20, 2022 Author Share Posted December 20, 2022 I'll do some looking today. Normally I make tooling but the stainless cups look like they take alot of force to swedge. I am not set up to make the bit end, it's curved and hardened. Also not surprised with the reputation of amazon specials. Quote Link to comment Share on other sites More sharing options...
Joey Mack Posted December 20, 2022 Share Posted December 20, 2022 The tool that removes them has a similar action to a tail pipe expander, with knurling on the out side to grab the inside of the cup. Quote Link to comment Share on other sites More sharing options...
Onyx610 Posted December 20, 2022 Share Posted December 20, 2022 This has all the part numbers you could need. Good Info too. https://static.nhtsa.gov/odi/tsbs/2013/SB-10082932-6903.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.