D2Denny Posted October 13, 2022 Share Posted October 13, 2022 Went to change the oil in my G-75. Decided to pull the bottom cover in the pan to clean the screen. Removed cover and found no screen. Looking into the removed cover I see the remains of 4 spot welds. Was the screen detachable or was it welded to the cover? Going to have to pull the pan as the tin cover or shroud at the bottom of the oil pump and pickup tube is cracked. Don't want it to completely fall free and potentially block off the flow to the pump. 1 Quote Link to comment Share on other sites More sharing options...
mowerman Posted October 15, 2022 Share Posted October 15, 2022 It’s been 40 years since I looked at one sorry I can’t help you thank God you caught it when you did good luck.., Bob Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted October 15, 2022 Share Posted October 15, 2022 The screen was used when the early engines did not have a full flow oil filter but only a by/pass filter and it was a luberfinner 500.I can not rememeber how the screen was connected to the cover. Quote glenn akers Link to comment Share on other sites More sharing options...
mowerman Posted October 15, 2022 Share Posted October 15, 2022 I would guess spot Welds and yes mine also have the Lubert finder so does my DM … bob Quote Link to comment Share on other sites More sharing options...
D2Denny Posted October 17, 2022 Author Share Posted October 17, 2022 This truck only has a bypass oil filter with a 750 type element in it. So at this point nobody is sure how the screen was installed in the oil sump?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.