Jump to content

2005 Cv713 Ai400 power issues

Recommended Posts

On 10/12/2021 at 6:43 PM, theakerstwo said:

That is what this site if all about to learn.I know i have learned alot that i did not know or forgot.

Agreed 100 percent!  Forgot is a big one for me these days!😡

Link to comment
Share on other sites

Boost pressure under full load when the computer isn’t kicked is 30-35psi. When the computer kicks it cuts everything in half. Power/ boost everything. Me and the local dealer are leaning towards a phantom EUP issue that’s kicking the computer out under full throttle but not throwing any specific codes. A few hit’s on 2 injector eup’s but I guess you get what you pay for and can’t rely on anything rebuilt now a days. I can’t even buy EUP’s new. 

On 10/20/2021 at 7:05 AM, Vmac3 said:

What is the boost pressure when the engine is under load? I have seen boost pressure sensors cause this issue as well. 



Link to comment
Share on other sites

Not saying this is the case here BUT! I ran into this years ago ! I would be having the the dealer look in to the torque limit switch on the trans if the switch is engaged when this anomaly happens there may be a short circuit in the to wires heading to the torque limit switch causing the Ecu to think its in low! This will cut the power By almost exactly half  no codes ! to eliminate this possibility  cut or remove the wires at the VECU that come from the torque limit switch on the trans.

just a place to look if your options are running out!

Just sayin!

Edited by fjh
  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...