58GreenMackB Posted June 29, 2017 Share Posted June 29, 2017 Can anyone tell me how to remove the steering column from the steering box on a 58' B Model. Column is loose, but need to know how to disconnect the steering shaft from the box to remove it. Any help would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
HarryS Posted June 30, 2017 Share Posted June 30, 2017 Somebody correct me if I'm wrong but I don't think you can disconnect the steering shaft from the box without disassembling the box. In order to remove the steering column the box along with the shaft have to be disconnected from the frame and removed from the bottom. Quote Link to comment Share on other sites More sharing options...
58GreenMackB Posted June 30, 2017 Author Share Posted June 30, 2017 It was that way on my 61' Corvette with a smaller (But similar) box, but wanted to check to make my life easier if possible. Quote Link to comment Share on other sites More sharing options...
theakerstwo Posted June 30, 2017 Share Posted June 30, 2017 The column stays on the box and as for as i know it cant be removed but pull steer wheel and then in the floor ifi remember there is a panel you remove to give it room it go down and slide forward on the ground and under the axle. 1 Quote glenn akers Link to comment Share on other sites More sharing options...
58GreenMackB Posted June 30, 2017 Author Share Posted June 30, 2017 Thanks for the input guys . Now its just getting the stubborn pitman arm off and I'll have her out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.