b61mack Posted February 18, 2016 Share Posted February 18, 2016 At work we have a 1990 CH613 with a 2090 and a bottom rear mounted pto, the pto won't engage, the air cylinder goes all the way in but nothing turns. you cant hear the gears trying engage. would the splines be striped out or is there something in there that might be the problem. Quote Link to comment Share on other sites More sharing options...
mrsmackpaul Posted February 18, 2016 Share Posted February 18, 2016 may wanna pull the air supply hose off and make sure air is getting there firstI doubt the gears or splines would be strippedIf it has air just start pulling it apart I reckon it will be pretty obvious once you have it apartPaul Quote Link to comment Share on other sites More sharing options...
b61mack Posted February 19, 2016 Author Share Posted February 19, 2016 Thanks Paul I pulled the pto off today and the shift fork shaft inside the pto was broke, ordered a new one. 160.00 bucks for a new one. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.