Jump to content

Manual regen


Recommended Posts

If they will let you watch the temps, t1,t2 and t3, as well as dpf differential psi. That will give you a good indication as to any "regen" issues. T1 should get to around 600 to 650 give or take 50 deg. T2 and t3 should work towards 850ish, it's more important that the sooner they match and stay close to each other the better. Dpf differential psi tells you how much restriction that filter is causing. The lower the better, anything below .5psi during regen is fine.

Link to comment
Share on other sites

  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...