Vogtskie Posted June 13, 2014 Share Posted June 13, 2014 I bought a rear end without a power divider and was told all I needed to do was put my power divider on it! simple right! not the outer cam does not have the teeth for the power divider so I need to change the outer cam from one rear end to the other but can't get it to come off. I have removed the 3" nut but cannot get the outer cam to move. Now what?? Quote Link to comment Share on other sites More sharing options...
wheeler73 Posted June 13, 2014 Share Posted June 13, 2014 You will need to press it off. Also it will need to be set up properly. Quote Link to comment Share on other sites More sharing options...
Vladislav Posted June 23, 2014 Share Posted June 23, 2014 Do you mean the cam has no teeeth for a diff lock?If so you maybe can use it just having no lock.I'd better swap it that way. Quote Никогда не бывает слишком много грузовиков! leversole 11.2012 Link to comment Share on other sites More sharing options...
b61mack Posted June 23, 2014 Share Posted June 23, 2014 I did the same thing, the older cams had the course spline and the newer cams had fine splines don't know what year they went to fine. I had to buy a new course cam to fit my pinion. you might want to install a new nut too. Quote Link to comment Share on other sites More sharing options...
b61mack Posted June 23, 2014 Share Posted June 23, 2014 I forgot to tell you that it is better to take the pinion housing off that way you can put it in a press to press it off and back on, everything comes off together. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.