Eastcoastdiesel Posted September 19, 2013 Share Posted September 19, 2013 So, it got wrote up tonight. I'm looking around and cannot find the sending unit bad. There is plenty of oil in the beast. It has a slight knock, which leads me to believe a bearing. But until I get some input from my fellow mack attacks I don't wanna attack the truck.... Hooo boy. A little past 800k miles. Quote Link to comment Share on other sites More sharing options...
j hancock Posted September 19, 2013 Share Posted September 19, 2013 Do you have maint. records on this unit to see what has been done to it?At 800,000 miles, if it hasn't had bearings it sounds like it might need them. Quote JimIt doesn't cost anything to pay attention. Link to comment Share on other sites More sharing options...
staxx Posted September 20, 2013 Share Posted September 20, 2013 Oil pressure sensor is on the oil filter pedestal , Some have oil temp and pressure sensor they are rite next to each other behind your second oil filter. temp sensor takes 3/4 wrench oil 1in wrench . I would hook a external oil pressure sensor and line up and check first. Make sure the oil is not dulluted with fuel, the supply fuel pumps are bad about blowing front seal and filling oil up with fuel. Good luck. There is a good Mack shop over in Rock hill area exit 73 I think ,have a good friend/tech that works there. Quote Link to comment Share on other sites More sharing options...
br549 Posted September 20, 2013 Share Posted September 20, 2013 Our 2005 CXN broke a rocker arm bolt lost some oil pressure and had a knock in it, it had the powerleash engine brake on it, but it happen around 250,000 miles. They have upgraded rocker arm bolt for them. If you have the Power leash engine brake you might ck them. Quote Link to comment Share on other sites More sharing options...
Eastcoastdiesel Posted September 20, 2013 Author Share Posted September 20, 2013 Thank you guys I'm doing a teeth picking on this truck today, wish me luck and I'll report with the news! Quote Link to comment Share on other sites More sharing options...
Ludrell Posted May 14, 2022 Share Posted May 14, 2022 i Quote Link to comment Share on other sites More sharing options...
Ludrell Posted May 15, 2022 Share Posted May 15, 2022 2007 Mack CHN613 model, where is the oil senser Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.