mackniac Posted April 24, 2013 Share Posted April 24, 2013 Hi !Anyone knows if Mack has a spec for the play on a torque rod (the bushing rubber joint )?the one on the rear most diff. that attach to to side of the frame , I've been called at the inspectionfor a loose torque rod but from my mechanic opnion he says there is almost 1/8th of play which I think is way normal . what do you guy's think , the inspector need a proof that it is normal . Quote Makniac , collector and customizer of die-cast model in 1/50th scale Link to comment Share on other sites More sharing options...
hatcity Posted April 24, 2013 Share Posted April 24, 2013 no play 1 Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment Share on other sites More sharing options...
mackniac Posted April 25, 2013 Author Share Posted April 25, 2013 ok fine thank you , I will then put a new one there. Quote Makniac , collector and customizer of die-cast model in 1/50th scale Link to comment Share on other sites More sharing options...
j_martell Posted April 27, 2013 Share Posted April 27, 2013 Sloppy suspension sucks....... Quote Lack of planning on your part does not constitute an emergency on my part.... Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.