Rwm3 Posted November 16, 2012 Share Posted November 16, 2012 Hi all. I am a new member. I look forward to being part of BigMackTrucks!I have an '88 RW713 I am restoring. I am in the process of changing the origninal, flush bumper to the contruction/extended bumber version. I was able to get one of the last of these bumpers from Mack, and was able to get the tow bracket/brace that goes between the two end brackets that this new bumper hang off of. However, I cannot get the two end brackets - they are no longer available. The Mack part numbers for these backets are 21QL4129 and 4130. They bolt to the front of the frame with three bolts, and the bumber bolts to these brackets with 3 bolts on each bracket face.Would anyone know where I could get these two pieces, or have these two pieces that I could purchase?? Attached are a few pics of the brackets I am looking for.Thank you very much! Bob.............. Quote Regards, Bob.......... Link to comment Share on other sites More sharing options...
farmer52 Posted November 16, 2012 Share Posted November 16, 2012 Contact the Mack museum and they may provide prints so you can have them fabricated. As always, a donation to the Museum would be appreciated. Good luck!Another option is to contact Barry at Watts Truck Center.BTW, welcome to BMT! Quote Ken PRR Country and Charter member of the "Mack Pack" Link to comment Share on other sites More sharing options...
rsb502 Posted November 16, 2012 Share Posted November 16, 2012 If watts can't help Phil at global truck parts may have some used ones call 603-239-7008. Good luck with the truck, post pics I'm glad another superliner is getting fixed up. 1 Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Rwm3 Posted December 1, 2012 Author Share Posted December 1, 2012 Thx for the tips guys - I was able to get the brackets from Phil! Have a good day all! Quote Regards, Bob.......... Link to comment Share on other sites More sharing options...
rsb502 Posted December 1, 2012 Share Posted December 1, 2012 Glad we could help, post some pics of the truck when you can. Quote "Any Society that would give up a little LIBERTY to gain a little SECURITY will Deserve Neither and LOSE BOTH" -Benjamin Franklin"If your gonna be STUPID, you gotta be TOUGH" "You cant always get what you want, but if you try sometimes you get what you need" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.