j hancock
-
Posts
13,372 -
Joined
-
Days Won
524
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by j hancock
-
-
FLA is a little humid so that isn't helping with the water. Sort of surprised that the purge on the dryer isn't keeping up.
Could inspect the air inlet to the compressor and the discharge for any damage, kink or restrictions to help with slow air build. If there is carbon buildup in the discharge line, the line should be replaced.
-
1
-
-
- Popular Post
- Popular Post
The DM Mack made Lots of money for many folks.
-
3
-
To the left of the LJ is this B-80/81. Both trucks belonged to Mike Trotto at Worcester Sand and Gravel when the pics were clicked.
-
2
-
-
- Popular Post
Amazingly clean original cement mixer shown at the Western Mass show about 10 years ago.
-
6
-
-
Compressor could be failing. Just water or some coolant when it is drained? Are you running an air dryer?
-
- Popular Post
- Popular Post
Keep in mind that Econodyne refers to the type of turbocharging and charge cooling for increased efficiency, etc. So, there were Econodyne Maxidynes as well as Econodyne Thermodynes.
-
3
-
- Popular Post
- Popular Post
Mack B61 dumping flatbed with excellent paint work. Has a dog riding shoot gun on top of the air cleaner rain cap.
-
6
-
11 hours ago, Ditchdiggerjcf said:
I guess ranchhopper has left the building.
Send him a PM through BMT. The system is linked to his email account and he should receive your inquiry.
-
- Popular Post
Took the picture in 2016 with the Dog being 100 years old!
-
3
-
That's a strange looking Mack B model.....?
Nice Job! It will be good to have a big Binder out at the shows!
-
1
-
-
- Popular Post
- Popular Post
Beautiful R700 on display at the ATCA National Meet about 20 years ago. It is Roger Gerhart's truck and at the moment, I can't recall which engine is under the hood.
-
10
-
- Popular Post
Long hood, Long legs and Loooooong Gone!
-
9
-
1
-
Don't know the owner but know what you are saying.
Maybe he bought new stacks and ran the exhaust making sure things fit and then he will start fixing the rest of the truck???
-
1
-
-
- Popular Post
Classic lines of the R model Mack.
-
8
-
Excellent, a forever memory is created!
-
Ford has a focus problem.
Not talking about the the car either. Ooops, that's gone too...
-
1
-
-
Large gasket sheets are available for DIY use. Check out McMaster-Carr.
-
Very nice shaft drive AB dump truck.
.jpg.738fa51222d15386490fdbf9706ddd18.jpg)
-
1
-
-
Looks Fabulous!!!
-
1
-
-
- Popular Post
- Popular Post
Vlad is correct and here is the other side.
-
3
-
The gaskets will be a DIY project at this point. Most forgo paper or cork gaskets and use RTV gasket maker.
-
17 hours ago, Vladislav said:
the higth of Cruiseliner measuring over the cab's top?
Depending on tire size, loaded or unloaded, the height ranges between 116.5 and 121.5 inches from a 1976 WS brochure.
-
1
-
-
Don't have one to weigh.
Some info from Mack brochures for examples.
CH613 14,300
CV713 15,500
-
1
-
BMT Forum Logo
CoronaFarce-rus
in Odds and Ends
Posted
Don't forget a shave and a beer!
Well, maybe not for the kids....