Jump to content

nasty51ford

Big Dog
  • Posts

    198
  • Joined

  • Last visited

Everything posted by nasty51ford

  1. It was used to haul a race car, they had ramps for it which he said were in too rough condition and he scrapped them (the truck did sit for two years, but that story sounds fishy! Lol) I will measure the wheelbase today, if I keep it, I'll put a Reese hitch on the back, and pull my 20' car trailer with it, then if I need to haul two cars, I could drive the first one up on the trailer, than use my trailer ramps to drive it from my trailer up onto the flatbed! Hopefully I'll be starting on the inside this weekend. Also, I need to track down another air ride seat for the passenger side, maybe the driver side too, the one on the driver side is OK, but the way it is designed, it tends to tilt down in the front, because the air bag is all the way to the back of the seat platform, not a great design!
  2. Just wait till it get's computerized!
  3. Yeah,back in the day, my dad built his own trucks, and a lot of his friends as well, so he would have known for sure.
  4. Yep, you can, I was there and it happened. I'll never forget it.
  5. There! I found out how to edit it, fixed it and added some more pics!
  6. Yeag Bigdog, I thought that might be the case, and when I look at pics the fenders look the same, I guess it's one "O" them thar opteekill illoozhuns! Lol.
  7. Yeah, I have to say they did a good job fitting the sleeper to the cab though. I need to get a pic of the crawl through area.
  8. Yeah, I have no way of knowing if this was or not, I am going to write to Mack and get the history on the truck.What is strange, if you look at a B67 and a B61 from the side, the fenders seem to start in the same place at the cowl, and the grille sits in the same place with the front of the fenders, but the hood is shorter on the B67 somehow? or is this my imagination, I assumed that it is because of the dog box in the cab where the engine tucks under the firewall. You have to excuse me, as I'm still learning all the details on the old Macks, I grew up in KW's, but always loved the old Macks, my Uncle had a blue B75 when I was a kid with a sleeper, air starter, and a quad box, he hauled frozen with it up and down the eastern seaboard. I remember riding in it with my dad and him pushing the air starter when we went by a cow pasture, never saw cows MOOve so fast! Lol (ok, bad joke)
  9. **UPDATE** After all this time, I have discovered my truck is a triplex, not a duplex, direct must not have been used for a long time, as it wasn't going in, and I knew the trans had been changed, so I thought it was a duplex, but Al Penino recognized the case number and told me that it's a triplex, so I started playing with it, got it shifting, and now it works perfectly, so....MORE SHIFTING FUN! Lol ! Thinking about trading, or selling my B67 to get something a little bigger ( B73, B75, R700, Brockway, Autocar, etc.....) Mine runs and drives great, it has a **13 speed triplex, double over**, and the END 673 engine. I would really like something with a bigger sleeper, or room to put one on it, or to make into an RV ( Mine is titled as a motor home) If the truck I get is already titled as a motor home, that would be a big plus. My truck has VERY LITTLE rust, with solid floors , all the gauges except the fuel and speedo work, it will run around 75 MPH or better, I have to DL a speedo app on my phone to check this. The bed tilt mechanism is electric over hydraulic, it is all new looking. I had it working once, but then it stopped, I noticed a loose ground, and when I went to check it, it broke, so I have to re ground it and try it again, it just hasn't been an issue because I never use the tilt bed for anything. The sleeper is a newer Freightliner sleeper, a 36" and is in very good shape, it could use a new mattress though, the cool thing about the sleeper is, it DID AWAY WITH THE CONCAVE CAB !! so, more room! I love driving this truck, just want something bigger that I can actually use for traveling in like you would in an RV. I prefer twin stick trans, but will consider others. This engine seems to have been rebuilt at one time, it has no leaks, holds great oil pressure, doesn't seem to use any oil (no long trips so far though) It does have a weak injector though. It will not miss at low RPM, but once it gets up over 14-1500 RPM it will if you put your foot into it, but if you ease out a little it hits on all 6 again. I plan on isolating and replacing the suspect injector. The windows crank up and down good, the driver window, and vent window are cracked, and the right windshield has a crack in it. The tread is great on the tires, it has the tall 20" rubber, the clutch works great, and the trans shifts perfectly. Also, it has been converted to negative ground, and has a GM single wire alternator on it. Please feel free to ask any questions, or feel free to make trade offers. Or if you want to text, or call (352) 551-7492 I'm thinking 7000.00 would be a fair asking price. Thanks for looking Keith
  10. Hmmmmmmm, interesting, well, I think I'll see if I can find a correct one for it. Thanks MAddog, funny thing,..................... my CB handle has been Maddog since 1973 ! Lol
  11. Hi, this one isn't too far from you, and it doesn't look like a rust bucket! http://www.auctiontime.com/OnlineAuctions/Details.aspx?OHID=5526193&lp=trk&bcatid=27
  12. Has anyone else seen a breather like this one? it's on my 1958 B67. it has the END 673 in it, I have been looking at pics of other B models, but not seeing any with a breather like this one.
  13. Pretty cool, I almost bought a black one with a 220 Cummins in it about ten years ago, it belonged to Zellwood Drum Company in Zellwood, Fl
  14. OK, it looks just like the one in the pic I posted, but I'll see if I can get some of it myself. Keith
  15. No Connection: Came across this little beauty while looking for parts on Craigslist. somebody needs to give her a good home! http://greenville.craigslist.org/hvo/4713222171.html
  16. Yeah, and nice duct tape job on the passenger seat! Lol, he obviously does NOT know what "mint condition" means! But it is a nice little Mack, my B67 is in a little better shape, just needs paint
×
×
  • Create New...