Search the Community
Showing results for tags 'FOR SALE OR TRADE'.
Found 143 results
-
I don't often sell one of my Macks,but I've had a few inquiries about my W-71T,so I've decided to offer it for sale.This is a rare chance to purchase a very rare truck. VIN # W71T1156,it has a 200 Cummins diesel,5 speed trans.,with manual shift(2nd stick)2 speed rear end.10:00x22 steel budd wheels.Only 215 W-71's were built,less than 10 are known to be still around,this is the only factory built single axle tractor still kown to exist.Solid and very complete. I'm asking $20,000 OBO and might consider trades,either full or partial depending on what's offered.Additional pics will be available to SERIOUS BUYERS only.
-
1985 DM686S, ENDT676,2 stick 6 speed,44k rears on Mack walking beam,cab and hood rough,runs good,under 300k miles,no title,for parts or off road use only - $4500 OBO 1993 CH613,E7-350,Fuller 9 speed, Mack rears on air ride,under 500k miles,but rough shape,runs, have title - $3500 OBO 2007 CXN613,E7 427,Mack 13 speed,air ride,under 500k miles,runs good,frame is broke,no title,for parts only - $5500 OBO
-
this is a 1971 Autocar this truck is a classic.this truck has a 350 big cam cummins in it with a 13 speed roadranger transmission. A motor swap was done 2 years ago the engine is a 1984 new injectors were also installed.the truck has 55,000 pd rears.also this truck is equiped with a triple piston Bristol donald dump body. The frame is spotless.Also the interior is all there and in good shape on this truck. Also comes with a new air seat. for any questions please call Garrett O'Grady at: 7329397494 will trade for a Mack tandem dump15k
-
86 inch sleeper currently white Selling for 1200
-
I have a 1999 RD690S just turned 418,000 miles with a 25 foot rack body with removable sides with a 5500 LBS capacity lift gate 44,000 rears 14,300 front E 7 300HP 6 speed trans and double frame excellant runs good get in go to work $18,000 or BO Call 603 231 1345 if you have any interest thanks John
-
Superliner in great condition ..strong v8 12spd11.24 20,000 frt spring 44000 camelbacks 4.17 gear. Double frame jakes lift axle...solid ready too work no issue's Dot certified. . I have hauled several different ventures with this trk it has no problem climbing r pulln at ALL!!!!.. truck was purchased new 1 oil field company ordered it.. as a water tank truck engine is original 436,000 serviced by mack mech Cell 504 231-4665 $ 5, 000.00 -
I have a 1983 Mack RWS721LST with a Em9 440 rebuilt to 500 hp. It is a solid running truck, shift good drives good just needs body work. It does not have a title only a bill of sale.
-
1965 mack b61 tandem axle. was once a dumptruck. has power steering. non turbo 711 with 20 speed. truck runs and drives quite well. stops just as good. looking to sell to make room for another toy. willing to take 3,000 or best offer for the truck and parts I have along with an r model hood. so it's a good deal. call or txt me at 267 243 2913 anytime thank you
-
any body interested in what appears to be an old overnite MB, Ill have it here at my house soonI guess I just couldnt let it go to the scrap yard so I paid way too much for it so hopefully one of the other Mack nuts here will want it its a Mack diesel, duplex trans, dual fuel tanks runs and drives got some rust though, still has the tachograph in the cab too. Might trade for some E9 stuff, or a B or R model.
-
FOR SALE OR TRADE 90 super liner cat,jakes and brakesaver
wyorover posted a topic in Trucks for Sale
it was love at first sight and had to have this truck but now i just have to many trucks that won't let anyone drive but me so i may sell this one . 1990 new cat,jakes,retarder,18 spd really solid and clean old truck still has original carpet ac works i still drive about once a week had plans to real do it up but my old kw (first truck i bought ) is taking to much time this is the kind of truck when you see your reflection in storefront windows you just can't stop grinning and feel guilty about taking money for driving this thing. its that cool -
1977 r-700 Mack Tri Axle 866 375 v8 Maxidyne transmission 44rears 260k miles 16 1/2 body/ Double Frame Very clean inside and out Tires - 85% Pintle hook with air to the rear New: clutch, heads, radiator, canvas tarp, brakes, batteries, air cleaner runs and drives great for pics go to the link it wouldn’t let me upload a pic https://hudsonvalley.craigslist.org/hvo/d/mack-r700-dump-truck/6400793855.html
-
Hoods, shutters, windshields, nos tires ,extra rear end, extra spindal magnetos, 2 extra front wheels, champion plugs, clutch disk,Bosch magnetos,and lots more parts. Both trucks roll and steer,Great start for projects.SOLD extra engine and 1set of tires
-
1954 B42S with a really big dump bed..It was running when I parked it there but the oil level was dropping and the radiator was filling up..I believe it has an overgeared duplex..floors are rusty..included is another 1954 B42S chassis less cab $2400.00 for all. Located 50 miles NE of Nashville, TN...Also have a 1958 C95 with a bad engine that is well weathered...a 1968 CF600 that is partially stripped, had a good turbocharged engine with a Spicer 2 speed behind it...
-
Got my 93 613 dump truck for sale. Has E7 350 with super 10 transmission, has Mack top load rear difs, front rear has bearing loose but truck does run and drive. Bed is 16.5 long, 48 inches tall, 8 ft wide. Has pintle hitch, virgin tires May 2016, new kingpins July 2016. $10,500. also have 89 superliner with core E6 350 no trans, air ride axles. Bought it as parts truck for the diffs but other work has taken my time away from fixing it, would sell the pair for $12,500. Or would consider trade for a sleeper truck , Pete KW, or Mack Note: Pic of superliner not wanting to upload will try again soon
-
Looks to be in good shape. Make offer. Hood in pic not for sale.
-
"73?4070B Transtar single axle tractor.8V71/RT910.Truck was fully serviced last fall,new 5" straight exhaust.Solid truck,most everything works(less the AC).Very nice aluminum tanks,Lund visor,needs batteries and the rubber is fair.Front glass has cracks.Asking $3K obo,sold with a GA bill of sale due to the year.Easy fixer upper or use the drivetrain for another truck?Located in Northeast GA not far off Interstate 85.
-
**UPDATE** After all this time, I have discovered my truck is a triplex, not a duplex, direct must not have been used for a long time, as it wasn't going in, and I knew the trans had been changed, so I thought it was a duplex, but Al Penino recognized the case number and told me that it's a triplex, so I started playing with it, got it shifting, and now it works perfectly, so....MORE SHIFTING FUN! Lol ! Thinking about trading, or selling my B67 to get something a little bigger ( B73, B75, R700, Brockway, Autocar, etc.....) Mine runs and drives great, it has a **13 speed triplex, double over**, and the END 673 engine. I would really like something with a bigger sleeper, or room to put one on it, or to make into an RV ( Mine is titled as a motor home) If the truck I get is already titled as a motor home, that would be a big plus. My truck has VERY LITTLE rust, with solid floors , all the gauges except the fuel and speedo work, it will run around 75 MPH or better, I have to DL a speedo app on my phone to check this. The bed tilt mechanism is electric over hydraulic, it is all new looking. I had it working once, but then it stopped, I noticed a loose ground, and when I went to check it, it broke, so I have to re ground it and try it again, it just hasn't been an issue because I never use the tilt bed for anything. The sleeper is a newer Freightliner sleeper, a 36" and is in very good shape, it could use a new mattress though, the cool thing about the sleeper is, it DID AWAY WITH THE CONCAVE CAB !! so, more room! I love driving this truck, just want something bigger that I can actually use for traveling in like you would in an RV. I prefer twin stick trans, but will consider others. This engine seems to have been rebuilt at one time, it has no leaks, holds great oil pressure, doesn't seem to use any oil (no long trips so far though) It does have a weak injector though. It will not miss at low RPM, but once it gets up over 14-1500 RPM it will if you put your foot into it, but if you ease out a little it hits on all 6 again. I plan on isolating and replacing the suspect injector. The windows crank up and down good, the driver window, and vent window are cracked, and the right windshield has a crack in it. The tread is great on the tires, it has the tall 20" rubber, the clutch works great, and the trans shifts perfectly. Also, it has been converted to negative ground, and has a GM single wire alternator on it. Please feel free to ask any questions, or feel free to make trade offers. Or if you want to text, or call (352) 551-7492 I'm thinking 7000.00 would be a fair asking price. Thanks for looking Keith
-
Decided to sell my Mack......much as I hate to, Love this truck! http://orlando.craigslist.org/cto/5234365352.html
-
This is a link to my ad http://orlando.craigslist.org/cto/5570709407.html -
1974 mack r 237hp 5sp runs good same owner since 1984 $5000 540-309-4973 troutville va 24175
-
FOR SALE OR TRADE Brown aluminum Reefer $2500 OBO
steth121660 posted a topic in Misc. Items For Sale
36' Brown Reefer, single axle pulls straight, landing gear works is dry inside. Needs rear door skins and 1 dolly wheel always looking for interesting stuff to trade. Call Scott 607 two two 7 3nine 1 five -
I have a late 70's mack fl coe with a factory v8. Long wheel base aluminum frame (no cracks). Its rough but runs. Asking $8000.
-
I have four extra aluminum rims I will not need 8.50X24.5 one hundred dollars each I can ship these I get excellent rates these were the inside rims so they are pretty dirty it would take a lot to get them back to a shine but perfect for inside tractor or trailer wheels to save some weight.
-
Have a complete cutoff section from a 44K camelback set up. Not sure if bushings are good and torque rods look a little loose. I took the 5.32s that came with the cutoff out and have the 4.42 diffs from my current truck that go with it. The front diff is junk but back one is in good shape. Not sure if value so some input would be much appreciated. I believe they are 17 spline axles and hub piloted hubs. I am located 20 mins east of Pittsburgh PA. I can take and send pics of anything that is questioned. Thanks!
-
FOR SALE OR TRADE 58 B 61 passenger side round gas tank
smithmotorsports posted a topic in Parts for Sale
Looking for hood chrome and grill emblem and a round fuel tank for the pass side of my 58 B 61
