mackaholic

If Watts Mack can't find them for you they probably don't exist. I needed a wear ring for an 866 v-8. My local dealer claimed they were no longer available. Not at Watt's. The parts man I talked to went straight to Mack and found one. He did say not to mess it up though as that may be the last one. Oh, by the way, don't remove the wear ring from the crank(if it has one), the new style rear main goes right over it to repair any damage. I think they only used the wear ring stlye in 73' or 74'. Good Luck!

Lost the headlight on my truck. pretty well have it down to either a fuse or the light switch. Problem is that I can't find the fuse panel. any ideas where mack might have hidden it??

If you don't find anything wrong with the switch or fuses, check the dimmer switch. I have seen several of them give out and you loose the lights. Good luck.

I've had several old speedos apart for restoration. The tough part is getting the bezel off. They are usually crimped on to the housing. To get them off you have to take a small screwdriver or similar tool and from the back side where the bezel meets the housing, gently roll the crimp back enough to get the bezel off but not so much that you bend the front side.

Once you get the bezel off the needle is a press fit on the shaft. If its not frozen it should come off by gently turning the needle counterclockwise. It should come off the shaft without too much trouble. Then the face comes off with the two screws you can see from the front.

There are people who specialize in rescreening the face of the gauge. Look in Hemmings or other such publications. I have also had them made at a local sign shop but the detail wasn't as fine as the screened method. Just depends on how much you want to spend and how good you want it to look when finished. Hope this helps, Brad

Beautiful truck, now if they would just finish it and paint the steering wheel some other color.

You need to talk to Dan Thomas.

Thanks,

I've heard about Dan's collection but haven't met him yet. Maybe this year at the Brooks truck show.

Out here on the West Coast the engine of choice( at least in the Mack LT's) seems to be the Cummins 275 supercharged engine. Just wondering if anyone has had any expirience with them? I've heard they had a very different sound to them. I've got an LT needing an engine and was wondering how hard it would be to come up with one.

Thanks, Brad

The company I work for in CA has a truck that was rated at 28,500 GVW. I took it to a company that manufactured truck beds and for $300.00 they looked at the truck and retyped a new door sticker that said 26,000#. Being what the state of CA calls an end manufacturer they can certify the truck's GVW as they get cab and chassis' and install the bodies. I don't know how far they can lower the GVW(ie 45,000 to 26,000) but it is possible and legal, just as long as' you don't get caught haling something over the limit.

Out here on the west coast we have the written, skills and what they call walk around test. For the walk around you have to list all of the components of the truck you would check during your "pre-trip inspection". the whole test can take up to 5 hours depending on the examiner you get and how bad a mood they are in that day. If you go this route you have to know the truck pretty well to pass. Judging by some of the yo-yo's we have on the road out here in trucks, someone's giving CDL's out of gum ball machines. I used to do the testing program for the local fire dept for firefighters to get their CDL's. It's the same program the larger trucking co's use. They can make it real easy to get a license if they want to.

Anybody know where the oil sending unit is on this engine? I am trying to hook up a temporay oil pressure gage.

I have been all over this engine and can not find it anywhere,  does it connect on the oil filter housing? Also, does anyone have a service book for this engine or any pictures/ drawings?

Thanks!

DW

←

David,

I went out and looked at the engine I pulled the water pump off of. The oil pressure line comes off of the right side of the engine just to the right of where the governor bolts on. On my engine there are two 1/8" plugs there, I believe either is oil pressure. Hope this helps, Brad

P.S. How did the water pump work out?

-Users Screen  Mackaholic

-Was it a positive or negitive experience  Positive

-What was purchased,  Water pump, manifold parts.

-Speed of communication and shipping.   Very good

-Date Purchased or sold  12/10/05

Brad did exactly what he said he would, parts were just as he described them and they were packed very well for 60 Lbs. of cast iron!

Parts were priced fair and I think we both made a good trade.javascript:emoticon('')

smilie

David Waits

←

Thanks, Glad I could help keep another old Mack on the road. Brad

I used to have conversion kits available for the R Mod's, but the company closed and I haven't been able to find another source!  If anyone knows where to get a copnversion kit, let me know!  I can buy a bunch and help lower the cost!

←

Barry,

There is a company called Newport Engineering that makes all kinds of wiper conversions for old cars and pick-ups. I have used their products on a couple of projects and they fit and work well. They would probably do the prototype if you supplied a cab and ordered a sufficient number of the kits up front. Their contact info is available at www.newportwipers.com. With the number of B models out there it shouldn't be a problem getting them interested.

Brad

PS. Since I'm new to this what does LOL that I see in some of the posts stand for? Out here in the fire service in CA its "little old ladie".

Brad, The truck looks great from the pictures.I like how long the frame is too. The axles look like they are all the way back.Make her a roll back to go to the shows,Tim

←

The truck looks alot better now after several hours of pressure washing! The truck has a 212" WB but I'm missing about 4' of frame behind the axles. I found the original owners wife in Idaho and found out it was originally a logging truck so if I can find a 50's vintage long logger setup it will go back to a logger. Besides with the 44,000 lb rears in it the ride is less than smooth. It has been to a show already but on the lowbed behind the superliner. Can't beat that airride suspension.

For those of you looking for the bulldog, base and grab bars for a CF there is one on Ebay, item #6584903988. I think it runs another day or so, you better hurry.

seem to be at a place where it's impossible to know that a Mack is sleeping...

←

This truck was several miles off the paved road on a horse ranch. I don't think you could even have seen it from the air unless you were looking. It pays to have friends who keep their eyes and ears open.

Finally got some pictures of the truck up as it was when I found it. They're in my gallery so take a look. I'm still working on pictures of the rest of the fleet. Brad

How about posting some pics of the F715,Brad?

←

I'm still trying to figure out how to work this site but I'll try to get some photo's in the gallery soon. I don't know if I've got any of the cabover but I do have some of my Dad's superliner hauling home the LJSWX that I can post. Three generations of Mack lovers ought to be worth something. It's not easy but we're trying to keep Mack alive on the west coast!

Just bought a set of Mack mirrors from thebigguy on ebay. He is a little hard to get ahold of by ebays' mail but answered his cell phone first try. His name is Art Vega (817) 881-2901, e-mail: avegafiretruck@sbcglobal.net. He has a lot of firetruck parts for sale and says he can find whatever parts you need. Good luck. Brad

hey lee. sounds like you're the only smart one in your club!   

←

There are quite a few up here, mostly LT's but a few others also. My dad has a 1920 AB, 1965 F715 and a 1989 RW613, the later 2 still being used daily. Its nice to see the old ones being fixed up. this looks like a great site for Mack info.

Hi, My name is Brad Petersen. I'm from northern CA and have a couple of old Macks, an LJSWX, an LTH and an LTL parts truck. I am in the process of fixing up the LJ, the LT's are future projects. I've spent the last 15 years repairing and restoring several macks in the area and finally have a couple of my own.