Nathanwhit1
-
Posts
201 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Nathanwhit1
-
Sound thank you. Just trying to source a repair kit online over here in the uk
-
Is that a serviceable item ?
-
Me again haha when my friends ultraliner blows off at 120 it drops about 20 psi out of the air dryer. Is that right or is the air dryer releasing too much
-
Hahaha for the time been 🤣🤣. She is biting right at the top so I think further adjustment or replacement might be needed in the future but for time been she’s driving properly
-
Afternoon all. I now have a working clutch ( yipeee ) thanks everyone for all the help and advice. It did just need the free play adjusting. She is a little bit high but I can life with that for the time been.
-
Any of you lot wanna come to the uk and do mine 🤣🤣🤣🤣🤣
-
Yeah Paul told me to do that with adjusting the ring it’s the lever part I’m not quite sure about
-
I think my head has just gone pop 🤣🤣🤣. So I adjust the clutch lever on side of the gearbox first. What’s the best way of doing this as I will be doing it by myself ? The photos didn’t come through bud
-
Tbh I’ve done plenty of work on modern clutches but not many of this setup so any info is appreciated
-
I’ve spoke to Paul and he has said the same thing. I’m going to adjust the clutch on Sunday and give it a try. I don’t think the fork would be seized as it seems to be moving ok in the video ?
-
So my old girl has been parked up around 30 years. When I lift the clutch up it takes a while for drive to engage even when my foot is all the way off the pedal. Is it just a build up crud and rust on the fly wheel or something more. To me the clutch seems to be working mechanically ok Video.mov
-
-
Sound will try that cheers
-
Yeah for some reason it won’t let me upload the photo it’s coming up error
-
The Hi does anybody know the part number for this valve it’s on my friends ultra liner. The feed comes in then feeds all the air tanks
-
V8 ultraliner M H 613 hand brake fault
Nathanwhit1 replied to Nathanwhit1's topic in Air Systems and Brakes
He has checked all the tanks and they are filling up that’s why we are thinking it could be a valve somewhere -
V8 ultraliner M H 613 hand brake fault
Nathanwhit1 replied to Nathanwhit1's topic in Air Systems and Brakes
Sound I will tell him cheers -
Evening all my mate has an ultra liner and struggling with the handbrake. The truck is building up too full pressure but the hand brake won’t release. We think there’s a valve sticking what’s stopping the air tank filling as the air suspension won’t inflate either. Does anyone know the location of the valve or which air tank feeds the hand brake system and suspension system. cheers Nathan
-
Mack cruiseliner wiring issues
Nathanwhit1 replied to Nathanwhit1's topic in Electrical, Electronics and Lighting
Sound will have a look cheers bud -
I will get there with her
-
Cheers buddy. Think I’ve gone a lot more grey and bolder in the last couple of months 🤣🤣🤣 but we are getting there
-
do you know where I could get a workshop manual for it ?
-
Hey Paul mine has had grease nipples fitted so pumped it full of grease. It is a little sloppy but hoping it might get better with some use Nathan
-
she does sound better now. That’s first time it had been run for a couple of weeks. It’s been parked up 30 years so she’s still blowing some cobwebs out 🤣
-
Evening all. Just before Christmas I purchased the last cruiseliner left in the uk. I’ve done a lot of work on her over Xmas and just got her driving ( in a fashion ). I have a few issues with her but will ask the questions in different posts. I’ve read some of your posts and you all seem very knowledgeable so hopefully I will get some answers. Thanks for now Nathan 5c50fddb-b20d-4141-be48-469f6b5688d2.mov
BMT Forum Logo
