Nathanwhit1
-
Posts
145 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Nathanwhit1
-
Hope this pic makes sense buddy
-
There’s a castle nut you adjust behind the bearing for the internal adjust of the clutch bud
-
Not a spicer but will do the job
-
It came out easier a lot easier than I thought. The flywheel is saveable and is been done as I we speak. Do any of u know the torque settings for the flywheel bolts and the clutch pressure plate please
-
Getting there slowly
-
Evening all I’ve started on the clutch swap today. It’s all on bolted and ready for lifting out in the morning. I’ve managed to source an new old stock clutch over here in the uk so I’m off too fetch that tomorrow afternoon and hopefully have her back up and running over the weekend
-
Sound thank you I shall keep you all updated at the weekend
-
Sound cheers bud
-
Sound thanks for all this. I’m hoping to start stripping it back end of the week and see what’s happening etc. before I loose my temper with it will the gearbox come apart with out doing anything with the clutch release or will the tranny just pull straight out ?
-
Yeah fingers crossed lol
-
Haha I’ve got a telehandler and a forklift so should be ok oh and a lskedge hammer just in case I get really mad 🤣🤣🤣
-
Yeah that’s what was confusing me. I know I’ve never done one of these so just doubling checking etc
-
Ah sound on the that link he bolted it up thru the tranny inspection point in didn’t quite make sense to me
-
Just reading that thread. Do you have to bolt the pressure plate up once the gearbox is on. I’ve always fitted the clutch on to the flywheel then installed the gearbox ( tranny ) but I’ve only ever worked on modern push clutches ?
-
Sound thanks been told there was two sizes
-
From that can you find out what shaft size it is ?
-
-
It’s 6 speed buddy I’m just trying to read the fitting procedure 🤯
-
Will look thanks
-
-
Proper sucks
-
It’s just getting the parts over here in the uk. I have more chance getting a clutch then getting a clutch and flywheel etc
-
Can you make out the writing bud I can’t on mine ?
-
I could do with knowing what sort it is. I have been told it’s a splicer but some people say 14inch and some people say bigger so I don’t wanna order anything till I know and wanted to get one ordered so when I take old one out I can put new one straight in if that makes sense
BMT Forum Logo
