609albert

trust me ,if you seen what the mix looks like when finished you'll like it , also it doesn't splatter like plain silver , just my liking.

hi louie ,your mack looks great, now the clean up begins, looks like in great condition, If you need to paint the diamond plate on the running boards a lot of guys use a mix of Rustuleum white,gray, silver for a nice finish (plain silver will rub off). AL

thanks fxfymn, seems pretty through ,will try next weeks.

hi guys ,need procedure in correctly getting air out of brake system ,pedal goes about 2 or 3 in from floor before resistance, pump pedal and pedal comes up , each wheel has 2 cylinders,an upper an a lower, do I have to bleed both?

try cal little, in hummelstown pa, near hersery pa goes by pine hill trailers

some will also get the build spec's, small blue print (copy) ,dealer info, orginal owners , good luck with your mack.

where is that warehouse? I'd say someplace in PA. ........

me again , matt pfahls is coming down to my place in south jersey ,either this we or next with my truck ,going back empty I think , you can call me on my cell, 609-617- 9235 . AL

I have used JOHNSON TOWING in burlington county n.j. before the have large flat bed equipment, you might also try matt pfahls in ct. he comes down into jersey offen maybe coming down with a truck and could take yours back. he specializes in macks ,his number is advertized on this site or goggle it.

you got a great deal on that mack, that wooden folding ladder worth at least $500., my L HAS has the compartment under both doors that has a 21/2 intake (not many like it) in the day they had a short section of hose and 1 ff could hook to a hydrant by himself very fast., looks like it just needs a waxing, good luck with it

I use cooking oil in the small side tank for the primer oil ,cause it goes out on the soil or roadway.(now we don't want a haz-mat issue).most all macks have or had a positive ground system,just look at the battery-batteries under the officer seat,find the what is wired to the frame, + or -. I think orginals use a 6volt battery connected together for 12 volt. If you have to jump start connect + to+ and - to - , don't let vehicles touch. I think I sent a photo to you of my 54 Ls85. Just a side note ,if you want to see a neat Ls,google hoot gibson 52 mack, Isaw this truck on a visit to AZ last year.owned by alan brunicina ( past F.C. of phoniex FD) it has a Hall -Scott engine 1000c.i. the hood is 11" longer than a Ls85

everyone right about pumping , don't run pump without water, chocks are good too, Also you have to double clutch most, when shifting the r.p.m.'s have to be kept low for a good shift, start out in 2nd gear. same with downshifting low r.p.m. .Our LS can do 60 ,but I drive it on the open road around 50. slow is safe and these trucks are old and you have to stop..... even though we rebuilt the brake system totally. also down the road you might want to install an electronic module in the distributors to replace the points.

looks rough to me ,the underside is probably worse , snow and ice and road salt in bethletme

check with cal little, I'll get his # tomorrow ,he is in PA,. near hersey , we have a 54 LS85 1709 ,my e-mail is hinoki22@comcast.net and I'll send a photo

I have a 54 LS 85 ,had it for 3 yrs, took 2 yrs to total restore , price you pay depends on the general condition of the truck , but if it is not on e-bay ,start low and you can always come up in price, it looks like it is a 1000gpm (4 -21/2 discharges) some had a Hall-Scott engine because of the larger pump also more rare and uses more fuel!!! we did put a power steering unit on the engine for easy of driving and a 400 gal poly tank to replace the steel one that had 40 holes in it. my e-mail address is hinoki22@comcast.net and I'll send a large photo of it. It's a trophy winner!!

hi guys ,went to my first pa pump primers in harrisburg ,pa it was the greatest, I saw more MACKS pumping their in one place along the river at one time ,it was great, also ever brand of fire apparatus ever made , also had a great flea market for fire stuff. Hats off to CAL LITTLE for organizing it again!!

their is a guy in bethlehem ct. ,name is don holden he is a collector of the 'C' rigs ,I don;t have his # ,but could probably get it from a guy that just brought a CF model from him.

that was my mack ,I had purchased from a guy in north carolina, on e-bay ,he lied about condition of the truck,I think he brought it from the guy in barre ma., like I said the guy in N.C. lied about condition ,no brakes at all and some other issues. we rebuilt the brake system completely , complete tune up , and cleaned up ,sold it to the guy that you have photo's of now (tom) he drove it out of my place, a lot better condition than when it came. he only had it for a short while and wanted to sell it to buy a older ALF Ithink from the 30's. learned a lesson , DON'T BUY ON WITHOUT SEEING ANYTHING!

I have a 54 LS85 (last group of 23 produced) ,not for sale, but if you send your e-mail I'll forward photo, I haven't learned to post photos on this site yet

what ashame the B was cut up ,how can people do such a thing,

yea ,the roto rays are neat, can't put one on my mack cause it now has 9 lights on the front, but it does have something different it has an exhaust whistle that is really loud

wow !you have a great looking rig, I have a 54 mack LS85, can you tell me how to posts pictures? thanks

their is a video on you tube a step van on fire, f.d. pulls up in front ,lines off, gas tank starts leaking , stream of flaming fuel going down the street, truck starts rolling down the street into the fire truck, ACKWARD!!!

sorry to hear about your bad incident, but if you find a 707 matt is the one that can make it like new , just got our LS85 back from him, like new !!!