bts-4120
-
Posts
331 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by bts-4120
-
you can run b99 with no problems if you use some common sense I keep the ratio to about a b75 in the 427 to minimize hp loss as it gets colder its needs to be upped to a 50 50 mix once air temps get below 35 all my other engines cat, cummins also run fine on it no hp loss no gelling no filter issues
-
In the states Mack has 4 different 460's a 460p made 487peak hp if you had a all mack and was lucky enough to get the xt program ie 460xt peak hp was closer 490 why does mack set aus. up more from the factory emissions would be my guess, they cranked the e9 up to 600 down there topped out at 500 in the states the new MP8 is set at 500 in austalia but only 485 in the states
-
T-2060a Is This A Good Tranny For Heavy Hard Loads
bts-4120 replied to eric kahle's topic in Engine and Transmission
trucks with t-2060's that was speced for off road or heavy haul usage usually had 6.34's a few rare ones's had 6.06's (t-2060 with 6.34 had about the same reduction as a t-2070 with 5.73 just not near as fast) 5.55 and t-2060 are a common set up work pretty well on end dump's -
T-2060a Is This A Good Tranny For Heavy Hard Loads
bts-4120 replied to eric kahle's topic in Engine and Transmission
Can you tell me what the ratio is in the lo forward/reverse so I can compare that to other transmission ratios we know. thank you T2060 RATIOS LOW HIGH 1 9.02 5.24 2 5.25 3.05 4 1.72 1.00 5 1.03 .60 R 9.25 5.38 -
propane injection has been around for awhile how much hp you gain depends on how big of shot you use, or your pistion will take you can also inject Nitrous for more kick if you are looking to make even more hp
BMT Forum Logo
