Jump to content

Rd Cab Replacement


Recommended Posts

I am going to replace the cab on our 1993 RD690. Can anyone tell me if I am limited to that cab or would a different style or year cab fit without major modifications?

Thanks, Brad :mack1:

Brad, the 73 and up model years are pretty much the same with the exception on minor holes in the firewall. Of course the DM, and U series cabs are different due to being offset 11 inches to the left, (driver's side) and the underside bracing and floorpan/firwall are different to facilitate this.

I've switched several through the years and it is not a big job to install a 1973 cab onto a 1994 chassis, (or anything in between) using all the original parts from the 1994 cab. Minor welding and fabrication is all that is needed.

Rob

Dog.jpg.487f03da076af0150d2376dbd16843ed.jpgPlodding along with no job nor practical application for my existence, but still trying to fix what's broke.

 

 

Link to comment
Share on other sites

Brad, the 73 and up model years are pretty much the same with the exception on minor holes in the firewall. Of course the DM, and U series cabs are different due to being offset 11 inches to the left, (driver's side) and the underside bracing and floorpan/firwall are different to facilitate this.

I've switched several through the years and it is not a big job to install a 1973 cab onto a 1994 chassis, (or anything in between) using all the original parts from the 1994 cab. Minor welding and fabrication is all that is needed.

Rob

Thanks Rob this will aid in my search. Thanks again

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...