Al and son Posted Thursday at 10:14 PM Share Posted Thursday at 10:14 PM Can anyone tell me what that piece in the floor where the brake pedal is at is called? Is that part different on the older smaller cabs? The part that was there was rusted out pretty bad and when we removed the brake pedal to change the valve it fell apart. Big question is, can that part of the floor even be gotten anymore? I need to fix it so I can move the truck to my house. We lost our storage for it. Trying to avoid having to tow it. Thank you!! Quote Link to comment https://www.bigmacktrucks.com/topic/75585-1970-r-model/ Share on other sites More sharing options...
mechohaulic Posted Thursday at 10:22 PM Share Posted Thursday at 10:22 PM no offence but it's called a floor board still. to save towing cost ; get a piece of metal flat stock ; cut a hole for brake pedal ; few screws to secure then move unit. later time a mor accurate piece can be fabricated. OR contact or fearless leader :WATT's to discuss a proper floor section. 1 Quote Link to comment https://www.bigmacktrucks.com/topic/75585-1970-r-model/#findComment-576582 Share on other sites More sharing options...
Joseph Cummings Posted 14 hours ago Share Posted 14 hours ago I think that floorboard section was the same for all R Models, even the 66 to 68 with the clutch pedal went down through the floor. Quote Link to comment https://www.bigmacktrucks.com/topic/75585-1970-r-model/#findComment-576606 Share on other sites More sharing options...
mowerman Posted 12 hours ago Share Posted 12 hours ago im pretty sure i put the same piece in my 66 DM it was out of a 90 R model mixer that rolled over,,good luck Quote Link to comment https://www.bigmacktrucks.com/topic/75585-1970-r-model/#findComment-576617 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.