Popular Post mack31 Posted September 23, 2023 Popular Post Share Posted September 23, 2023 (edited) New to us is this 1930 Mack BCCD. BCC813001 is the only of its kind to come off the line at the Long Island Factory. This was originally from the Franklin Square Hose and Chemical company. We will be doing a restoration on this truck and it’s already begun. We just had the fuel tank cleaned and new tires are ordered. At the same time we are working to get it running again. Edited September 23, 2023 by mack31 3 1 Quote Link to comment Share on other sites More sharing options...
yarnall Posted September 23, 2023 Share Posted September 23, 2023 Congratulations. Thanks awesome. What state is Franklin Square in? I would really like an AB or early B pumper, haven’t been lucky enough to find one yet. Quote Link to comment Share on other sites More sharing options...
mack31 Posted September 23, 2023 Author Share Posted September 23, 2023 10 hours ago, yarnall said: Congratulations. Thanks awesome. What state is Franklin Square in? I would really like an AB or early B pumper, haven’t been lucky enough to find one yet. They are in New York. We now have it in PA in Chester county. 1 Quote Link to comment Share on other sites More sharing options...
mack31 Posted September 23, 2023 Author Share Posted September 23, 2023 Looking for some parts grill guard swinging bell Mack logo steamer caps 4 Dietz lanterns in nickel with nickel brackets 2 Quote Link to comment Share on other sites More sharing options...
yarnall Posted September 24, 2023 Share Posted September 24, 2023 12 hours ago, mack31 said: They are in New York. We now have it in PA in Chester county. I’m in Berks County so not far away. There are always Dietz lanterns at Spring Melt in Allentown. That’s a half a year away. Quote Link to comment Share on other sites More sharing options...
yarnall Posted September 29, 2023 Share Posted September 29, 2023 I saw your Facebook post. For the top step on the fender, mine has a piece of wood cut with Mack logo plate bolted to it. I know Gary Mahan had had some it the plates cast. Do you also need the back step? I have one of those. Mike. Quote Link to comment Share on other sites More sharing options...
mack31 Posted September 29, 2023 Author Share Posted September 29, 2023 22 minutes ago, yarnall said: I saw your Facebook post. For the top step on the fender, mine has a piece of wood cut with Mack logo plate bolted to it. I know Gary Mahan had had some it the plates cast. Do you also need the back step? I have one of those. Mike. Hi Mike Yes I do need the top and the back step on the fender. I think I have found the shutters I have to go see and measure them after everyone gets home from Hershey Quote Link to comment Share on other sites More sharing options...
yarnall Posted September 30, 2023 Share Posted September 30, 2023 I sent you a message. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.