Moose Posted January 14, 2006 Share Posted January 14, 2006 l have removed the old rectangular steel step tank from my 1960 B61T and want to install a round aluminum step tank that l bought from a friend complete with brackets, also from a B61. Now l have been told that to do this all new holes have to be drilled inthe frame. Has anyone done this that can verify this? thanks, Moose Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted January 14, 2006 Share Posted January 14, 2006 Hi MooseI removed the standard square tanks off a B61 and installed Round aluminum aprox 50gal.. the bracket holes on the round tanks DID NOT LINE UP up with the square braket holes. so YES new holes will need to be drilled, also the bracket location is slightly diffrent between the two style tanks, so I could not use any of the square tank holes for the round tanks.hope this helpsTrent Quote Link to comment Share on other sites More sharing options...
David Posted January 15, 2006 Share Posted January 15, 2006 If it was possible, I would drill new holes in the bracket or build an adapter plate. More holes in the frame would be the last resort. Quote Link to comment Share on other sites More sharing options...
Joe Cummings Posted January 15, 2006 Share Posted January 15, 2006 l have removed the old rectangular steel step tank from my 1960 B61T and want to install a round aluminum step tank that l bought from a friend complete with brackets, also from a B61. Now l have been told that to do this all new holes have to be drilled inthe frame. Has anyone done this that can verify this? thanks, MooseI would keep the square tanks before I drilled extra holes in my frame,but hey that's just me.Joe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.