mcratchet1 Posted January 8, 2020 Share Posted January 8, 2020 Hey guys just wondering if the newer mack mru 2015+ with t310 and t318 transmissions, if the clutch still gets adjusted the same way as the older mr688s models? By old way i mean put a wrench on clutch adjusting bolt with prybar have someone step on clutch and push in spring to turn the bolt Thanks Quote Link to comment Share on other sites More sharing options...
fjh Posted January 8, 2020 Share Posted January 8, 2020 Yup If it does not have a solo clutch its the same! Remember to check / set the clutch brake first via the cable / linkage! Quote Link to comment Share on other sites More sharing options...
mcratchet1 Posted January 8, 2020 Author Share Posted January 8, 2020 is there a proper technique for setting the clutch brake Quote Link to comment Share on other sites More sharing options...
fjh Posted January 9, 2020 Share Posted January 9, 2020 The 22 hours ago, mcratchet1 said: is there a proper technique for setting the clutch brake The technique is simple enough .you want the clutch brake to engage right before the pedal hits the stop in the cab aprox 1/2 inch off the floor this can be adjusted via the clevises at either end of the cable or by the sloted clutch arm on the side of the trans! once adjusted then proceed to the inside adjustment! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.