Jump to content

Correct Wiring Diagram for 2001 CH613


Recommended Posts

Hello, Ive contacted my local mack dealer (Vanguard) and they were not very helpful in determining the correct item to purchase to obtain an electrical schematic for my truck. I also contacted mack directly with no response. Hopefully someone here can chime in.

I purchased this from the mack eMedia center

8-217-2007

Electrical System Troubleshooting, GU, CHU, CXU, Pinnacle Chassis Wiring Diagrams

 

Is the CHU the same as my 2001 CH613? I'm trying to look at the reverse switch wiring from the transmission to the dash as  I am no longer able to hear my rear siren and rear back up lights dont come on and having many connectors unplugged that I need to check continuity for.

Thank you.

Link to comment
Share on other sites

On ‎5‎/‎6‎/‎2019 at 4:32 PM, ivanuke said:

Hello, Ive contacted my local mack dealer (Vanguard) and they were not very helpful in determining the correct item to purchase to obtain an electrical schematic for my truck. I also contacted mack directly with no response. Hopefully someone here can chime in.

I purchased this from the mack eMedia center

8-217-2007

Electrical System Troubleshooting, GU, CHU, CXU, Pinnacle Chassis Wiring Diagrams

 

Is the CHU the same as my 2001 CH613? I'm trying to look at the reverse switch wiring from the transmission to the dash as  I am no longer able to hear my rear siren and rear back up lights dont come on and having many connectors unplugged that I need to check continuity for.

Thank you.

This is the diagram for your truck reverse circuit. Go to Fuse (FU42) 42 in the right upper corner and follow flow.

Reverse Circuit.pdf

Edited by Mack Technician
Link to comment
Share on other sites

Go to your dealership at 8PM with a flat of white printer paper. Ask the night foreman/service writer to print off the wiring diagrams or allow you access to print them off. If your a customer they should oblige. If they do it, come back with a large flat of bakery. Tips and food make you an “A list” customer. Night shifters at a dealership are the most under appreciated creatures on earth. 

Link to comment
Share on other sites

35 minutes ago, Mack Technician said:

Go to your dealership at 8PM with a flat of white printer paper. Ask the night foreman/service writer to print off the wiring diagrams or allow you access to print them off. If your a customer they should oblige. If they do it, come back with a large flat of bakery. Tips and food make you an “A list” customer. Night shifters at a dealership are the most under appreciated creatures on earth. 

lol Thanks for the advice. Much appreciated!

  • Thanks 1
Link to comment
Share on other sites

1 hour ago, ivanuke said:

lol Thanks for the advice. Much appreciated!

I see your 2001 schematics for sale on Mack E-Media for $54. Oddly, they are $22 for a 2000. Must be because of chassis mating. They group CL with CH on pre-2001 then the conversion occurs and chassis-groups CH with CX in 2001. 01’ is a 6 pc set. 

Edited by Mack Technician
Link to comment
Share on other sites

20 hours ago, Mack Technician said:

I see your 2001 schematics for sale on Mack E-Media for $54. Oddly, they are $22 for a 2000. Must be because of chassis mating. They group CL with CH on pre-2001 then the conversion occurs and chassis-groups CH with CX in 2001. 01’ is a 6 pc set. 

I see that as well now. I'll place an order for that. I also have a 2005 CHN613 but do not see an option to select CHN, only CHU. Hopefully the schematic I purchased originally is the right schematic for my other truck. Thanks again for the help.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...