Popular Post B MACK Posted March 9, 2019 Popular Post Share Posted March 9, 2019 My buddy is up north, west of Dead Horse. He sent me some picts of the road building, A couple of the water trucks had trouble driving on the edge . They build the roads with ice chips and lake water and snow sometime. 3 Quote Link to comment Share on other sites More sharing options...
hicrop10 Posted March 9, 2019 Share Posted March 9, 2019 I would think the 16h grader would be a little heavy for the ice roads? Quote Link to comment Share on other sites More sharing options...
Popular Post B MACK Posted March 9, 2019 Author Popular Post Share Posted March 9, 2019 They have a few 14's , but mostly 16 h's and g's. Weight isn't a problem. The ice is thick. And the road is on land, over top of the tundra. Here is a drilling rig being moved to another site. 65 feet wide, 200+ feet high, and I think it's 2.3 million pounds. Notice the C500 Kenworth hooked to it. It's something the way they do things up there. Like a 345 excavator and D9 on the same trailer together.. 4 Quote Link to comment Share on other sites More sharing options...
B MACK Posted March 9, 2019 Author Share Posted March 9, 2019 I should have said "notice the C500 Kenworths" . There are two 1000 HP C500's hooked to the front, and dozer if needed and the 16 blade is hooked to the rear , if they need some breaking help , the blade and ripper bar go down and the 16's tires are no longer on the ground. Quote Link to comment Share on other sites More sharing options...
hicrop10 Posted March 9, 2019 Share Posted March 9, 2019 I would like to be able to run one of them 16’s up there,push plenty of snow with an old g down here in philly.Little tight in some of the hoods the city inspectors would take us to. Quote Link to comment Share on other sites More sharing options...
B MACK Posted March 10, 2019 Author Share Posted March 10, 2019 Oops, I screwed up with my model letters, they have a few old g's but mostly 16 h's and newer 16 m's. The one my buddy runs now is a 16m. His old blade was a 16h , set up with a 20 foot mold board... Bout all I can do with a blade is put it on a lowboy, haul it up in the woods on a logging job, off load it and plow out a turn around so I head back to town. Haven't totally figured out the M's with the joy sticks yet.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.