BucketTrucker688 Posted June 4, 2013 Share Posted June 4, 2013 i just installed in december a new tach cable on my 91 rd688s / e7..its been leaving a drip of oil here and there so i tightened the cable nut on the front of the motor and it didnt stop the drip. i went to look at it again and realized the nut was tight and the cable was able to pull right out. i then noticed the new tach cable i installed in december had a piece of sh!t plastic flared end that i think broke from vibration and had cracks in the bends of the cable. this cable from mack costs $84.00 and i would really rather not have to go through a few of these cables a year. the original cable i took off split and was leaking oil so i changed it out for a new one never realizing the new cable had a plastic flare rather than the metal on of the original. does anyone know if theres a different part number for one with metal end? Quote Link to comment Share on other sites More sharing options...
smorse54 Posted June 4, 2013 Share Posted June 4, 2013 I just put a new PAI tach cable on my truck.Still has the metal ends, half the price. Steve Quote Link to comment Share on other sites More sharing options...
39 Baby Mack Posted June 4, 2013 Share Posted June 4, 2013 No wonder they don't use the old "Mack Quality-Depend On It" slogan anymore!Ron Quote Link to comment Share on other sites More sharing options...
MHfred Posted June 4, 2013 Share Posted June 4, 2013 Powl's speedometer in Lancaster could probably fix you up with what you need. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.